Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

oofoofoo

Tilbrooks and Morpower have the hand controlers plus maybe RPM as well.They will tune your car and you wont have to worry about messing with the settings. to my way of thinking its pretty much a waste of time having one unless you know exactly what your doing as you can do some serious damage in very little time!!!Plus there is the saving of approx$750 that the controller costs.

Regards

SKYLINE...

Link to comment
https://www.sau.com.au/forums/topic/25028-tuning/#findComment-562482
Share on other sites

its certainly not a waste of time having one! Have you sen what can be displayed on it? It can show up to 8 different engine stats at once, eliminating need for extra gauges. eg digital water temp, knock level, intake temp, injector duty cycle etc etc... of course you dont need to see all those things, but i love the digital water temp and air intake temp -also you can see your speed, so if you only have the std 180kmh speedo, you can see readings higher than that.

You can easily play with things such as idle speed and rev limit, so for peace of mind if someone else has to drive, set the limiter to 4grand or something then stash the controller!

above all else, they look cool, green backlight, stuck to the dash :P

Link to comment
https://www.sau.com.au/forums/topic/25028-tuning/#findComment-565005
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...