Jump to content
SAU Community

Recommended Posts

Time has come to sell.

Car:

  • 1994 Black R33 GTS25 Type-S
  • Manual 5 speed

History:

  • In 2004 by Special Vehicle Imports (QLD) with 50,000km. In the time I've owned it I have traveled approximately 10,000km per year. It has just clicked over 100,000 km and has had the timing belt and water pump replaced. It was serviced by Chapman and Chapmans every 10,000km and I change the oil, oil filter and inspect the spark plugs myself every 5,000 km in between.

Wheel/Suspension/Brakes:

  • Nismo LMGT4 forged monoblock rims 17x8.5 with Federal 595RS tyres (95% tread)
  • Whiteline springs with modified circlip height adjustable Bilstein shocks (Sydneykid spec)
  • Whiteline fixed front and adjustable rear swaybars
  • Whiteline adjustable front and rear camber bushes
  • Whiteline adjustable front castor bushes
  • Whiteline pineapples
  • Nismo front strut brace with master cylinder stopper
  • R33 GTR rear strut brace
  • Locked hicas
  • R32 DBA slotted rotors and calipers (rebuilt) front with Hawk ultimate brake pads
  • R32 stock rotors and calipers rear (rebuilt) with Hawk ultimate brake pads
  • ADR approved front and rear braided brake lines with Motul RBF600 fluid

Drivetrain:

  • R33 GTR clutch

Power:

  • Coby extractors with HPC (heat proof coating), 2.5" high flow metal cat and a standard R33 GTR exhaust
  • Apexi SAFC-II (Black version) tuned by Matt Spry

Cosmetics:

  • R34 GTR bucket seats
  • Stealth rear wing
  • Nismo tinted side indicators
  • Tinted windows

Extras:

  • CD Headunit
  • Pioneer 6.5" front speakers and Pioneer 6x9" rear speakers in a custom MDF shelf
  • Australian approved 3+1 immobilisation point $1000 aftermarket alarm system (installed by Chris Rogers, will disclose if buyer is serious)

That's most of what I can remember at this stage, they are the main mods and probably a few more little ones that I have forgotten.

As you can see it's quite a reasonably modded R33 GTS and is perfect for someone (especially P-Platers) who are keen on getting serious with the car in the future. I also have a set of Sparco Racing rims 17x8 if interested for a reduced cost. It currently has the Type-M front bar, however the stock one can be put back on. Also have Type-M side skirts and rear pods (white) which can be included if required.

Price wise, I will let it go for $14-15,000 right now. However I am aware of the current market and am flexible on pricing. I have retained a majority of the car's standard parts and will let it go for significantly lower price with a stock setup without all the good bits (ball park $8000).

Not separating for parts at this stage, but will separate to sell the car.

Contact: 0403112979 or PM (Eugene)

post-9983-1239230406_thumb.jpg

post-9983-1239230432_thumb.jpg

post-9983-1239230467_thumb.jpg

post-9983-1239230497_thumb.jpg

post-9983-1239230518_thumb.jpg

post-9983-1239230535_thumb.jpg

post-9983-1239230554_thumb.jpg

post-9983-1239230573_thumb.jpg

post-9983-1239230606_thumb.jpg

post-9983-1239230621_thumb.jpg

post-9983-1239230636_thumb.jpg

post-9983-1239230649_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/250871-1994-r33-gts25-type-s-non-turbo/
Share on other sites

thanks for the comments and free bump.

it certainly is a good package for someone new to performance cars and cars in general to start out. remember the package can be customised to suit budget!

  • 1 month later...
any figures on how much power was gained from the safc? i have been thinking about getting one but wasnt sure if it was worth it.
$7000 grand cash thats all i can afford and yuu have a deal i will ring yuu up and find were yur located if $7000 sounds k reply Edited by wrxstippp
$7000 grand cash thats all i can afford and yuu have a deal i will ring yuu up and find were yur located if $7000 sounds k reply

Why did you quote me?

any figures on how much power was gained from the safc? i have been thinking about getting one but wasnt sure if it was worth it.

gained about 5-10kW, wasn't a power tune though. basically to clean up air fuel ratios

$7000 grand cash thats all i can afford and yuu have a deal i will ring yuu up and find were yur located if $7000 sounds k reply

If you want it stock I might consider it, otherwise you're about $7-8K short mate.

considering i asked for a ball park $8K for a stock setup i think you will pretty much get that. if you are serious and really have the cash to go then give me a call and we can work something out - i may throw in the brakes and sparcos.

stock suspension, stock seats, basic sound system, take the safc out, stock swaybars, no strut braces, stock extractors, etc.

  • 3 weeks later...
if you don't sell it with the 34GTR seats i have first dibs on them :/

hahaha... everyone has asked me about them!

car will get a once over in the coming weeks. a service as well as getting the rear pods and side skirts fitted and painted.

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...