Jump to content
SAU Community

Recommended Posts

Time has come to sell.

Car:

  • 1994 Black R33 GTS25 Type-S
  • Manual 5 speed

History:

  • In 2004 by Special Vehicle Imports (QLD) with 50,000km. In the time I've owned it I have traveled approximately 10,000km per year. It has just clicked over 100,000 km and has had the timing belt and water pump replaced. It was serviced by Chapman and Chapmans every 10,000km and I change the oil, oil filter and inspect the spark plugs myself every 5,000 km in between.

Wheel/Suspension/Brakes:

  • Nismo LMGT4 forged monoblock rims 17x8.5 with Federal 595RS tyres (95% tread)
  • Whiteline springs with modified circlip height adjustable Bilstein shocks (Sydneykid spec)
  • Whiteline fixed front and adjustable rear swaybars
  • Whiteline adjustable front and rear camber bushes
  • Whiteline adjustable front castor bushes
  • Whiteline pineapples
  • Nismo front strut brace with master cylinder stopper
  • R33 GTR rear strut brace
  • Locked hicas
  • R32 DBA slotted rotors and calipers (rebuilt) front with Hawk ultimate brake pads
  • R32 stock rotors and calipers rear (rebuilt) with Hawk ultimate brake pads
  • ADR approved front and rear braided brake lines with Motul RBF600 fluid

Drivetrain:

  • R33 GTR clutch

Power:

  • Coby extractors with HPC (heat proof coating), 2.5" high flow metal cat and a standard R33 GTR exhaust
  • Apexi SAFC-II (Black version) tuned by Matt Spry

Cosmetics:

  • R34 GTR bucket seats
  • Stealth rear wing
  • Nismo tinted side indicators
  • Tinted windows

Extras:

  • CD Headunit
  • Pioneer 6.5" front speakers and Pioneer 6x9" rear speakers in a custom MDF shelf
  • Australian approved 3+1 immobilisation point $1000 aftermarket alarm system (installed by Chris Rogers, will disclose if buyer is serious)

That's most of what I can remember at this stage, they are the main mods and probably a few more little ones that I have forgotten.

As you can see it's quite a reasonably modded R33 GTS and is perfect for someone (especially P-Platers) who are keen on getting serious with the car in the future. I also have a set of Sparco Racing rims 17x8 if interested for a reduced cost. It currently has the Type-M front bar, however the stock one can be put back on. Also have Type-M side skirts and rear pods (white) which can be included if required.

Price wise, I will let it go for $14-15,000 right now. However I am aware of the current market and am flexible on pricing. I have retained a majority of the car's standard parts and will let it go for significantly lower price with a stock setup without all the good bits (ball park $8000).

Not separating for parts at this stage, but will separate to sell the car.

Contact: 0403112979 or PM (Eugene)

post-9983-1239230406_thumb.jpg

post-9983-1239230432_thumb.jpg

post-9983-1239230467_thumb.jpg

post-9983-1239230497_thumb.jpg

post-9983-1239230518_thumb.jpg

post-9983-1239230535_thumb.jpg

post-9983-1239230554_thumb.jpg

post-9983-1239230573_thumb.jpg

post-9983-1239230606_thumb.jpg

post-9983-1239230621_thumb.jpg

post-9983-1239230636_thumb.jpg

post-9983-1239230649_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/250871-1994-r33-gts25-type-s-non-turbo/
Share on other sites

thanks for the comments and free bump.

it certainly is a good package for someone new to performance cars and cars in general to start out. remember the package can be customised to suit budget!

  • 1 month later...
any figures on how much power was gained from the safc? i have been thinking about getting one but wasnt sure if it was worth it.
$7000 grand cash thats all i can afford and yuu have a deal i will ring yuu up and find were yur located if $7000 sounds k reply Edited by wrxstippp
$7000 grand cash thats all i can afford and yuu have a deal i will ring yuu up and find were yur located if $7000 sounds k reply

Why did you quote me?

any figures on how much power was gained from the safc? i have been thinking about getting one but wasnt sure if it was worth it.

gained about 5-10kW, wasn't a power tune though. basically to clean up air fuel ratios

$7000 grand cash thats all i can afford and yuu have a deal i will ring yuu up and find were yur located if $7000 sounds k reply

If you want it stock I might consider it, otherwise you're about $7-8K short mate.

considering i asked for a ball park $8K for a stock setup i think you will pretty much get that. if you are serious and really have the cash to go then give me a call and we can work something out - i may throw in the brakes and sparcos.

stock suspension, stock seats, basic sound system, take the safc out, stock swaybars, no strut braces, stock extractors, etc.

  • 3 weeks later...
if you don't sell it with the 34GTR seats i have first dibs on them :/

hahaha... everyone has asked me about them!

car will get a once over in the coming weeks. a service as well as getting the rear pods and side skirts fitted and painted.

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...