Jump to content
SAU Community

Recommended Posts

Hi all this is my first post on this site, but hopefully many more to come.

Im looking at buying a stagea in a cpl of weeks and have found one in QLD has a few mods, New to imports, turbos etc so dont have a clue, so help would be appreciated.

here is the link

http://www.skylinesaustralia.com/forums/Ti...ll-t250695.html

Cheers mrRS4

Link to comment
https://www.sau.com.au/forums/topic/251071-interstate-car-with-mods/
Share on other sites

not sure what the intake pipe mod is, but boost control is not legal, pod must be secure, coilover suspension that is height adjustable is not legal, the adjustable camber kit must be standard, and as long as fmic is securely fitted and no cutting or re-shaping of the reo or chassis is done, it should be fine. That "mod" to the front bar probably wont pass either.

Welcome to the defect state :)

Wait... Wait... Wait... we're walking about a inspection, not a defect check.

Go to the Sturt station to get the inspection. Make sure you remove any OBVIOUS defects (meaning, fat chrome BOV's sitting at the top of the engine in full view). They're not as harsh at the inspection as what a defect would be.

They'll check: engine numbers, tyre placard, spare tyre has 80k/h written on it, etc etc etc.

They WONT check: db test on the exhaust, bushes, hidden turbo timers, hidden bovs, oil leaks, etc.

I HAVE been through an inspection with a turbo timer tucked up in the drivers footwell area. Make sure your rims and tyres are not too large or too wide. Your best bet is to throw stockies on it.

Front bar will most likely pass as long as it doesn't look obviously hacked away at.

coilovers need to be swapped for stock stuff

front bar may or may not pass as it's been cut - discretion of inspector

boost controller equals fail

pod is fine if it's secure

i'm assuming the camber kit just replaces bushes so should be ok

the chromies will be fine for inspection but for everyday driving they are a BIG fail :)

the exhaust will be ok if it's not too loud or hangs too low

keep in mind the regency ID station is not 'regency', it's just around the corner from it. they can still defect you though

you can also take the car to a cop shop like sturt to have the ID inspection done, a little more lenient from what i've heard but i went the regency one myself when i bought my stag back from nsw. feel free to pm me if you've got any other questions/stag related queries :)

ID check, possibly. It depends if they will pick up on it when they open the bonnet, etc as it'd be extra light. But they wouldn't go out of their way to check it.

On that note, alot of people have told me my standard GTR bonnet is fiber-glass light! Which is strange.

unless the bonnet is adr approved then put a stocker on for the check just in case. guards may be ok but these days they need to be passed by an engineer if you want to clear a defect with them on so unsure about ID check

ID check, possibly. It depends if they will pick up on it when they open the bonnet, etc as it'd be extra light. But they wouldn't go out of their way to check it.

On that note, alot of people have told me my standard GTR bonnet is fiber-glass light! Which is strange.

GTR bonnets are made of aluminium

-D

Wait... Wait... Wait... we're walking about a inspection, not a defect check.

Go to the Sturt station to get the inspection. Make sure you remove any OBVIOUS defects (meaning, fat chrome BOV's sitting at the top of the engine in full view). They're not as harsh at the inspection as what a defect would be.

They'll check: engine numbers, tyre placard, spare tyre has 80k/h written on it, etc etc etc.

They WONT check: db test on the exhaust, bushes, hidden turbo timers, hidden bovs, oil leaks, etc.

I HAVE been through an inspection with a turbo timer tucked up in the drivers footwell area. Make sure your rims and tyres are not too large or too wide. Your best bet is to throw stockies on it.

Front bar will most likely pass as long as it doesn't look obviously hacked away at.

excatly the reason why i didnt put it in to the defect thread.

Thanks for the help everyone as i said this will be my first import/turbo and dont want to get f**ked over buying it, then having to fix everything b4 i can even register the car here in sa.

i brang my stock rs4s here from melb and went for an id check at the place near regency about 6 months ago. a guy looked briefly over the car which i think must be too low with the teins on it (shitn my self ild have to find stockies). but all he made me come back for was the manual in english.

Yes!!!! Make sure you have the vehicles manual in the glove box!! They pinged me for this, too! It's crazy, but it's required.

really? i must have got lucky as mine wasn't in my glovebox when i went through. only had to go back to remove the extra tint that was added to my privacy glass

I got a old chick at my inspection. She walked up to me with her clipboard and said "Where is the cars manual?" and I said "at home" and she then walked off and put a big X next to that box.

I failed that day.

Thats BS..... some of the cars dont even come with manuals.... thats utter stupidity....

I pray to every god out there, pls let us get a single nationwide vehicle scheme. Theyve been talking about it for 10 years and finally we're coming to the make or break point. Once that happens, SA is going to become a hell of a lot more relaxed I think, because we have to put up with petty minded nonsense that NSW and QLD don't have to. If the whole nation was subjected to SA roadworthiness rules, the outcry would be loud and clear.

*fingers crossed, because it seriously cannot get any stupider than our state rules*

-D

Spot on, Dohmar. I was furious when she failed me for having no manual in my glove box. Why is it required?! It's lunacy!

She also said "You need 80k/h written on your spare tyre, like this *gets out texta and writes it on the tyre*...*rubs it off the tyre* just like that."

I felt like saying "Wait... you've just written it on there? How does that fail it?!"

She was a oddball. Although, she had issues finding the engine number stamped on the block, too.

I registered both our cars when we moved to SA without even taking the cars in. As long as you have valid registration papers from your previous state if can just be changed over.

Hi all this is my first post on this site, but hopefully many more to come.

Im looking at buying a stagea in a cpl of weeks and have found one in QLD has a few mods, New to imports, turbos etc so dont have a clue, so help would be appreciated.

here is the link

http://www.skylinesaustralia.com/forums/Ti...ll-t250695.html

Cheers mrRS4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...