Jump to content
SAU Community

Recommended Posts

hi guys thought i might put this on here because it is doin my head in its seems to be lacking alot of power , before it did this it had lots of power pushing u back in ur seat ,but now its nothing like it i have gone all over the car checking if everything is conected and stuff but cant find out whats making it lose power as u accelerate , so if anyone could please help me out would really appreciate it ,thanks

Link to comment
https://www.sau.com.au/forums/topic/251325-lacking-power/
Share on other sites

i will do mate thanks but the thing is that it still boosts up lol ,like its has heaps of boost but no grunt behind it , like u driving along in third or four and plant it lags like revs go down slightly and then slowly goes back, but not as a qiuck and responsive like it use to be?and i put a full tank in it and when i have been driving it. the fuel in now down to a quater of a tank and only have done 180km on the tank, i think its somewhere in the eletrontics somewhere,in my thinking it might be getting to much fuel ??? any other problems it might be?? :)

Link to comment
https://www.sau.com.au/forums/topic/251325-lacking-power/#findComment-4355709
Share on other sites

arghh this is happening to me too!!! sorry to hijack mate but my car was lagging bad today too.. yesterday i cleaned out my AAC valve to sort out some idle issues i had.. and halfway to the city today the car starts to lag pretty much exactly as you described it.. and the idle is rough and lumpy.

any ideas? no mods really, as i said all i did yesterday was remove my AAC valve to clean it. pretty sure i put everything back on properly.

Link to comment
https://www.sau.com.au/forums/topic/251325-lacking-power/#findComment-4358288
Share on other sites

similiar problem to me,

car lags a bit, and i had a really terrible idle.

sometimes car would stall if i take a corner too slow,

changed spark plugs, helped the idle 10%

cleaned aac, helped antoher 10%

changed back to stock bov, from atmo, fixed the whole idle problem nearly completely.

Only issues i have, is

cold start idle, really lumpy

but once i drive aaround the block

it idles fine,

car still lags a bit tho?

Link to comment
https://www.sau.com.au/forums/topic/251325-lacking-power/#findComment-4359447
Share on other sites

well thats good to hear mate ur car is goin all rite but mine is still doin in my head im takin it down to a dyno place so they can tell me wats wrong wit it i think its running really rich other words alot of fuel that dont need to be in the engine lol

but no blck smoke tho

Link to comment
https://www.sau.com.au/forums/topic/251325-lacking-power/#findComment-4359982
Share on other sites

ok so last night the same shit happened again!! it seems like every 2nd or 3rd time i start it up.. it will begin to idle badly and struggle to make boost. then the next drive it runs perfectly! does anyone have any ideas what could be causing this?

cheers

Link to comment
https://www.sau.com.au/forums/topic/251325-lacking-power/#findComment-4360455
Share on other sites

ok so last night the same shit happened again!! it seems like every 2nd or 3rd time i start it up.. it will begin to idle badly and struggle to make boost. then the next drive it runs perfectly! does anyone have any ideas what could be causing this?

cheers

Link to comment
https://www.sau.com.au/forums/topic/251325-lacking-power/#findComment-4360456
Share on other sites

hey yea mine is still doing it but i think i somethin to do wit the computer or the wireing to it coz, i put my computer out and took the plastic cover off where the wires go and just pushed them in to make sure they are making contact, that seem to work for abit so i took it for a spin and then seemed fine , and i was rapped about it and then is started doing it again im going to go over the hole earths wires and everything else to make sure that everything is making contact , if any one else has any better ideas let us know thanks !!!

Link to comment
https://www.sau.com.au/forums/topic/251325-lacking-power/#findComment-4362568
Share on other sites

hey guy i went to the autoalic 2day and they found out y i was losing power , turns out that the nock sensor pug was playing up, and now go better , something that simply stuffs up everying lmao thanks for everyones help on this topic have a good one :)

Link to comment
https://www.sau.com.au/forums/topic/251325-lacking-power/#findComment-4379110
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...