Jump to content
SAU Community

Recommended Posts

  • Replies 447
  • Created
  • Last Reply

Top Posters In This Topic

"grooved dimpled (dimpled and slots) gold passivated, more rust resistant"

hi i received my rotors today, not what i ordered.

mine are not slotted

how do we fix this

kind regards james

Hi James,

That image I put on the 1st post of this thread was actually wrong as RDA put up the wrong one on their website. they have fixed it now.

Your grooved & dimpled rotors pattern should look like below. this is the correct one. If it is not let me know what they gave you...

post-328-1236668616_thumb.png

did they give you the plain one?

ok, you posted

Grooved Dimpled (Dimpled & Slots) - Gold Passivated - more rust resistance

and the pic of the rotors were slotted

the two types you had on offer were standard slotted and grooved dimpled slotted

and the price seemed to match

is it possible to replace these with the ones that were advertised

mayby it was just a mistake with the part numbers

so you wanted the gold passivated in straight slots with no dimples?

as far as I know RDA made the grooved dimpled gold passivated in curved & dimples.

the straight slotted ones will come in standard steel, not gold passivated. they did posted the wrong pic on their website when they change the overall website look, which I did ask them why the gold one looks different, and they have now replaced it with the right one, but since the new forum rule not allowing me to edit my posts after certain number of hours I could not replace the pic in the first post anymore.

the part number is correct. Rear R33 non turbo 7692G. The other one, 7692S, will come in 'white' stainless steel colour with straight slots and no dimples. not gold passivated.

what have you currently got at the front - is the curved shape grooves & the dimples causing a 'cosmetic' look issue ?

i just wanted slotted rotors,

i thought the gold passivated, grooved and dimpled rotors you advertised. were slotted

like the pics, but there not

slotted being the holes going through the rotor not the grooves or dimples on the machined face

i dont mind the mistake i just hope it can be fixed,

is it possible to get slotted rotors exchanged for the unslotted rotors i currently have

slotted being the holes going through the rotor not the grooves or dimples on the machined face

the rotors with holes going through the rotors is called a drilled rotor, not slotted. but RDA don't do them because they tend to crack under hard use with rapid heating and cooling cycle.

so they only offered (straight) slotted in steel finish, or the grooved & dimpled, which is actually the "grooves" name they were called by are actually curved shape slots. It's just like a marketing 'brand' calling curved slots as grooved, or sometimes they call it groovy.

I could ask but normally 99.99% they won't take returns if there is nothing wrong with the rotors, unless you had it for normal street use (not track use) and the rotors crack, as it will be a warranty return. Will have to ask them sometime tomorrow but I can't promise... as they haven't told me they make the gold passivated in straight shape slots like the standard slotted.

unless you're ok with the standard steel look (no gold anodised)...

just to add to rs73's comments, you REALLY don't want drilled (or also called cross-drilled) on a street car, they WILL crack under heat during street use. Yes the pictures are slightly differently, but at the end of the day, slotted is slotted, they will perform the same (the dimpled gold ones even better), both will allow the gases to escape and to increase the cooling area of the rotor.

I know its not any of my business but I wanted to chuck my 0.2 in.

ah, James. I got it now... It's called vents.

so the answer is no, RDA only have R33 non-turbo with solid rear discs, not vented.

There used to be an old part number RDA7690 but it is no longer available on the market.

and the dimension is a little bit different (hat height is higher and rotor total thickness is double the RDA7692)

so you may have a big problem trying to fit it in with your factory calipers, that is if you can still find RDA7690 around.

sorry for the confusion.

ok then sorry for the hassels.

you seem like a good seller and no-one else has had problems with you, Ive just come undone by those pics a bit misleading. but thats not at ur end.

i should have pm'd this rant

sorry mate

PS: the front R33 non turbo is made in vented rotors... (RDA7691)

not all cars have vented front to rear... my brother in law's Alfa Romeo 147 is an example, vented fronts, and solid rears.

ok then sorry for the hassels.

you seem like a good seller and no-one else has had problems with you, Ive just come undone by those pics a bit misleading. but thats not at ur end.

i should have pm'd this rant

sorry mate

no, that's allright. always try to help. and this information here will also be beneficial for other people who wants to understand some industry terms in brake rotors.

sorry about the pics as well, as I am limited by forum's feature so I am unable to edit some old posts, unless I start another thread which is a bit of a hassle to do.

the groovies should help your brake cooling at the rears, better than just standard slotted, considering as vented rotors wasn't an option in the first place.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...