Jump to content
SAU Community

Recommended Posts

i suggest you make a map up first mate, print some off...

nobody gets lost and everyone knows where they're going

simple, you'll have a great time

if you don't make a map or make a sh*t one, the result may be a tiny bit different

Have a Set Map , Time to meet and a time to leave

you say 8ish people can rock up anytime,

maybe having stop off like at cott or scarbz so NOR people can meet up :D

im not sure if i can make it tho working on car!

No Wai man I'm not doing one of these cruises again, dude listen to what Andrew and Ricca are sayign hey, because you dont' want to get eaten alive =P

i new too this can someone help me make a map

Lorenzo- Easy

Where : e-shed markets meet 8pm sharp for 830 take off!

1 st stop Cott

2nd scrabs ?

3rd blah blah

In bewteen them right what way to go as people get lost

whereis.com <--- copy paste info onto paper

Coastal Runs are easy to do as you dont really need maps as your going the same road the whole way but have STOPS and MEETING place for others!

If not ready dude Do it for Next weekend as people wont know whats going on!

And wont come on a cruise that has 1 or 2 people!

Do it next weekend mate, you're best to actually drive your cruise yourself to make sure it works out. also to make sure there's no road works, no "no right turns" etc

also saying cott, scabz etc there big suburbs mate you need actual meet points i.e car parks, shoppign centres etc.

Maybe an idea to go on a few cruises before you do oen yourself so that you don't get raped hey

Patty....you still holding that rape grudge against me? lol

Yeah man if it's yoru first cruise give it good planning otherwise it might very well be your last *evil laugh*

lol mine first cruise is soon :) and i been planning since november

there is a cruise on sunday in the same area on antilag. just go to the one on sunday 11th.

Place:Captain Munchies Fremantle

Time:1.45pm meet. 2.30pm Leave

Just a general cruise,freo,cott,scabs,hillaries,scabs,cott,freo.

thanks guys ill go on acouple of ur cruzs firsth then next couple of month ill do one and anyone knw were the meet point for the cruz on sat night

definately go out and plan your cruise carefully.

whereis.com will not show you crests with stupid stop signs straight after them. add 100 cars to that scenario and you will have unhappy rear ends.

take the time to make it mate. ppl take the time to attend so make sure you do the right thing by them :)

whereis.com cruises are boring!

Make your own!

Basically, jump in the car and drive! Have someone sit beside you to write detailed instructions as to which way you turned on what street etc etc.

If possible, get someone else to drive it after you have writen the map to make sure its enjoyable and the map is accurate etc.

Then type it up, print out copies and hand them out at the meet point.

Id be happy to help out normally but i dont have much spare time at the moment sorry. Good luck with your cruise mate :)

definately go out and plan your cruise carefully.

whereis.com will not show you crests with stupid stop signs straight after them. add 100 cars to that scenario and you will have unhappy rear ends.

take the time to make it mate. ppl take the time to attend so make sure you do the right thing by them :)

thanks for that dan and someone on here wanna help me do a map

Definately take these guys info on board because they know what they're talking about. Ask Niszilla (Ryan) he's good and has allot of experience with cruises, maps etc and is normally always willing to help out when you're new :D

definately go out and plan your cruise carefully.

whereis.com will not show you crests with stupid stop signs straight after them. add 100 cars to that scenario and you will have unhappy rear ends.

take the time to make it mate. ppl take the time to attend so make sure you do the right thing by them :D

Also they don't usually pick up on the 'no right turns' etc.

like dirty3 said go for a drive and make one yourself from experience, makes it that little bit more interesting. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...