Jump to content
SAU Community

Need Help On Where To Buy Injectors/coil Packs

r33 chris

By r33 chris,
in South Australia

 Share

Recommended Posts

Carbon 34 Grand Master

Carbon 34

Posted
Posted

got my splitfires from sinergy they keep them in stock, cost about 500 for all , cheaper then OEM and the car runs heaps better, no misfires , smoother idle. seems like more pull to redline now, sputtered a bit before around 6500. money well spent.

no idea on injectors but ultrasonic clean stock GTR items might be the go ?

r33 chris Rising Star

r33 chris

Posted
  • Author
Posted
got my splitfires from sinergy they keep them in stock, cost about 500 for all , cheaper then OEM and the car runs heaps better, no misfires , smoother idle. seems like more pull to redline now, sputtered a bit before around 6500. money well spent.

no idea on injectors but ultrasonic clean stock GTR items might be the go ?

sweet man thats i will go there 2morrow and get some, thanks again

SLAPS Rising Star

SLAPS

Posted
Posted (edited)

Don't waste your $$ if you don't have to.

Grab a $13 tube of sensor safe grey silicon plaster your coils and they will be good for 24psi+.

Over 1.5years ago mine were no good for more than 12psi. Since then I've been running 20psi through them. When tuning we pushed in 24psi with no signs of ign. break down. :)

Edited by TheRogue
Carbon 34 Grand Master

Carbon 34

Posted
Posted

using dielectric silicone wont fix a dead coil pack but will keep a misfire from occurring from arcing to the head or other voltage leaks , I had a dead coilpack so replaced them all instead

the splitfires use a higher saturation voltage then OEM to achieve the kw power increase, also keeps the plugs from fouling but will wear the electrodes faster too.its not heaps more power but enought to feel in the seat of your pants , maybe a few KW tops but the drivability is better

sorry didnt read the thread close enough, thought it was a GTR motor. mines a RB25DET NEO for the record. call Sinergy and speak to Rocco to see if he has your coilpacks before driving out just to be safe. they stocked mine. and a few others. NS, ETC.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...