Jump to content
SAU Community

Need Help On The Spot Lights

FlyingEL
 Share

Recommended Posts

FlyingEL Rising Star

FlyingEL

Posted
Posted

Hi, Help please.

I really want my spot light to work. I did read a post regarding this topic but I still can't get it to work. I know there is a plug behind the steering column light stock, I checked, it's pluged in. I tried tracing the H4s lamp wire but can't see where it goes. Anyone knows anything other than that?

Link to comment
https://www.sau.com.au/forums/topic/251717-need-help-on-the-spot-lights/
Share on other sites
FlyingEL Rising Star

FlyingEL

Posted
  • Author
Posted
spot light?

which light are you talking about?

The light on the lower part of the head lamp. Not the fog light on the bumper. The H4 bulb. Apparrently, the steering light stalk control the spot lights, but mine just turn the markers on. But when i use my high beam, both the high and spot light will turn on.

Anyone knows what I'm talking about?

Frank350GT Rising Star

Frank350GT

Posted
Posted (edited)
The light on the lower part of the head lamp. Not the fog light on the bumper. The H4 bulb. Apparrently, the steering light stalk control the spot lights, but mine just turn the markers on. But when i use my high beam, both the high and spot light will turn on.

Anyone knows what I'm talking about?

I guess you get the 03 headlights, It seems the previous owner changed the wire and link it to the aftermarket fog light on bumper.

Please classfied, when you turn on the second switch on your steering light stalk (the one inside) what's happen?

BTW, it is usually called driving light.

Frank

Edited by Frank350GT
FlyingEL Rising Star

FlyingEL

Posted
  • Author
Posted

I don't have any fog lights on the bumper. When i turn the switch on, only the side marker (the 5W bulb which runs from top of the head lamp to the bottom on each side) turn on. No lights.

Chris where in the passenger door you are talking? do I need to talk anything off? I don't see anything from the outlook of the door.

Wilby Newbie

Wilby

Posted
Posted (edited)

Flying,

I think Chris means ... Look for the purple import plate that has been riverted to the passenger side intrusion bar/door area (open the passenger side door and u can see it). :cool:

Edited by Wilby
FlyingEL Rising Star

FlyingEL

Posted
  • Author
Posted (edited)
I have 4 levels of lighting on both my v35s. parker, yellow halogen driving light, xenon headlamps, then highbeam. Thats normal right?

I think all that 4 different lighting are standard on our car, but now I'm missing the yellow halogen driving light you are refering to. So mine's not normal!

Oh, I don't find any purple plate there but I found a dark red sticker under the bonnet and it wrote it was complied by IAMSHE Pty Ltd

Edited by FlyingEL
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

that tells me whose sheets he used. pull the stalk off and pop the back off of it. there will be a 3 pin plug on it that snakes back into the stalk. check that it is plugged in on both ends.

FlyingEL Rising Star

FlyingEL

Posted
  • Author
Posted
that tells me whose sheets he used. pull the stalk off and pop the back off of it. there will be a 3 pin plug on it that snakes back into the stalk. check that it is plugged in on both ends.

Hi Chris,

Just did that, pull out everything, both ends are plug in. What other problem can it be?

  • 9 months later...
OzSkyline Apprentice

OzSkyline

Posted
Posted
that tells me whose sheets he used. pull the stalk off and pop the back off of it. there will be a 3 pin plug on it that snakes back into the stalk. check that it is plugged in on both ends.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...