Jump to content
SAU Community

Recommended Posts

in the early stages of getting together a 26/30

theory is if i mod my 32, with things that i can use on a 30 as well

i know -10 will be fairly laggy on my stock 26 but i only want to buy it once...

im aiming for (in the 26/30) bout 500hp atw with as much torque as possible, building his sucker for the hills, with stock crank and forged rod and pistons.

question in by changing the exhaust manifold will i get alot more torque??

Link to comment
https://www.sau.com.au/forums/topic/252061-10s/
Share on other sites

please dont post what 'you' can get, as it makes others jealous

but can he get them with the extra dicky thingy that does some weird shit at 23,000 rpm (which is my redline in my new 3.9 stroked rb20 (questions on this new item welcome))

Edited by Dearlove
Link to comment
https://www.sau.com.au/forums/topic/252061-10s/#findComment-4363760
Share on other sites

Guest
This topic is now closed to further replies.


  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...