Jump to content
SAU Community

Recommended Posts

it's @ spencer panels...

shannons wouldn't let me get the painting done elsewhere.... :)

either way its all painted up and looking good...

should be ready this week (but i'm not holding my breath)

What happened to your choice of repairer?

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

i had my car towed on the night of the accident to spencer, as this was easy at the time... it was open and my car got locked away.

after this, i spoke to shannons and they decided that this constituted my "choice of repairer"

i went in and inspected the shop and the work, and then decided to leave it there...

i tried to get it painted @ DT, but shannons would not allow it :)

it's ok, cause if i even find 1 thing wrong then i can have it resprayed... and i'm gonna check HARD.

i inspected the car this morning and the paintwork looks mint...

hahah dude, if someone is coughing up the $$ (ie Shannons) you wouldn't take it to DT :D I'm not bagging out Vu at all (my car was sprayed at DT, bodykit done at DT) but if i had the choice, i'd be straight to Mr Gloss or Charli Battisti (sp?) for like a $7K respray. And i know i wouldn't offend Vu by sending my car to Mr Gloss, he knows the score ;) Or even Mi-Colour

I'm sure if you said i'd like it sent to Mr Gloss, they wouldn't have cared but yeah, check the car thoroughly, but also keep an eye on it a few months down the track as well.

So what parts have been sprayed?

am i thinking of the right place? is it gardenvale?

still i think it was pretty weak of Shannons to take that as your "choice of repairer"... :)

its in south melb....

i was trying to get it into DT cause i was TRYING to get them to respray the whole car.... no dice...

and i doubt they would have footed a 10k micolour style bill :) (would have been 1st choice if they were respraying it)

fair enough if you were going for a full respray...

but still, as i understood it, if you said "Mi-Colour... now" then as their much vaunted "choice of repairer" that shouldn't have been the deal.

Maybe there's some fine print about dropping your car off at a panel beater, or something like that

i had my car towed on the night of the accident to spencer, as this was easy at the time... it was open and my car got locked away.

after this, i spoke to shannons and they decided that this constituted my "choice of repairer"

i went in and inspected the shop and the work, and then decided to leave it there...

i tried to get it painted @ DT, but shannons would not allow it :(

it's ok, cause if i even find 1 thing wrong then i can have it resprayed... and i'm gonna check HARD.

i inspected the car this morning and the paintwork looks mint...

hahah dude, if someone is coughing up the $$ (ie Shannons) you wouldn't take it to DT :) I'm not bagging out Vu at all (my car was sprayed at DT, bodykit done at DT) but if i had the choice, i'd be straight to Mr Gloss or Charli Battisti (sp?) for like a $7K respray. And i know i wouldn't offend Vu by sending my car to Mr Gloss, he knows the score ;) Or even Mi-Colour

I'm sure if you said i'd like it sent to Mr Gloss, they wouldn't have cared but yeah, check the car thoroughly, but also keep an eye on it a few months down the track as well.

So what parts have been sprayed?

am i thinking of the right place? is it gardenvale?

still i think it was pretty weak of Shannons to take that as your "choice of repairer"... :P

Ditto..

If I ever need repairs/respray through insurance (touch wood), I'll be taking it to the most expensive place I can find...If that means they decide to write it off rather than pay the bill, then so be it. Vu knows he's my man if it's coming out of my pocket, but insurance wise I'll be taking them for all they're worth

both towies had to come out as the car was too low and woudn't fit on the first truck so we had to get the flatbed :P

spencer panels shop is amazing, i left the car there as they have the equipment and skills to do the job properly.\

the only reason i was thinking of going to vu was to get a full respray (spencer wouldn't even let me PAY the difference) and because they aren't too happy about modifying front bars etc, as they normally deal with stock cars.

after work has commenced you can't change repairer... shannons have said that if i'm not happy then i can have it done again wherever i want but i have to let spencer finish the job first

after work has commenced you can't change repairer... shannons have said that if i'm not happy then i can have it done again wherever i want but i have to let spencer finish the job first

ok, that sounds fair enough :P and by the sounds of it, they know what you'll be getting in terms of quality from Spencers

DT arent good at all if you ask me, I had my fibreglass front bar repaired there, because my panelbeater doesnt do fibreglass, I asked to have ALL cracks in the damaged area ground back and filled back to original condish, and primer only over the repaired area.

I go to pick it up and the whole thing was painted over with primer...I get it painted a week later at my panel beater and low and behold cracks appear through the paint in the area that they supposedly repaired.

Rubbish work as far as im concerned.

there's fibreglass, and then there's fibreglass - you can't always guarantee the outcome even if done to what you asked.

you'll also find, unlike some places, they're happy to fix any issues that come up and you can bring it straight back.

DT Panels is good work and cheap prices. That's how i see it. Solid work, but if you want to go higher, then you gotta pay. Mi-Colour does great work but would be way more than DT.

did you take your front bar back to DT?

Ditto to all of the above. If you'd bothered to speak to DT, they would have rectified the problem. They are the best value for money panel beaters around. Of course if you wanted to pay $10000 for a respray you can go elsewhere, but if you want to pay $2000 and get a very reasonable job then they offer that option :ermm:

Well considering it cost me $500 to have the bar sprayed after the repair, i doubt they would give me $500 to have it sprayed again as well as repairing it for the 2nd time.

So i didnt waste my time. Just wont go there again.

  • 2 weeks later...

well 6 weeks have past and i finally have my baby back!!!

car looks great... spencer panels did a bang up job!

i also tuned on e85 today.... vid in this thread has shot of cars front end :ermm:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...