Jump to content
SAU Community

Recommended Posts

yes, added unsprung weight and rotational inertia will effect your performance of ur suspension, acceleration, and braking.

big? depends on ur definition, id certainly focus on a lot of other things before i spent big $$ of ultra-lightweight wheels, but i would stay away from heavy wheels.

personally i look for a strong rigid wheel which is relatively light, when u buy a heavy wheel they are often not only heavy but weak.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4368845
Share on other sites

Weight is also relational to size. Stick to a smaller 16 or 17 inch rim. It is possible to find fairly light wheels in these sizes at a decent price.

And as above. Yes. Pretty big impact.

Again, lightweight attractive wheels in a good sieze = $$$$. Best go a smaller rim, thats not heavy but not "light" and spend the money elsewhere to make up for the additional unsprung weight

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4369014
Share on other sites

Hey all,

I've got some to my experience with rims some very heavy ones, the advanti 3 spoke ones. My question is do heavy rims make a big impact on handling performance and straight line speed?

Cheers guys

Handling? Yes.

Straight line speed? No.

The way to understand it is pretty straight forward. You may think the springs in your suspension hold the car up off the ground. But what they actually do is hold (Push if you like) the wheels onto the road. The heavier the wheel is the less capable the suspension will be of maintaining an even amount of force on the road after the wheel hits a bump. That is why (Simplistically anyway) a bad set of wheels can disrupt the handling of a car.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4369648
Share on other sites

A few years ago i was reading a magazine (Wish I could remember which one now for reference) where they took a stock evo and gave it to a professional driver who posted some very consistent times around a track. Then the put some very expensive lightweight wheels on (same tires) which he then took out for a few laps - the result, only a few 10th's of a second quicker.

Oh, and as for the increase in sidewall issue, take into consideration a formula 1 car tire - massive sidewall...

Edit: Sorry, I re-read my post and thought it sounds a bit arrogant - just trying to back up the idea that they will make a difference, but not a big one, not trying to start an argument :D

Edited by Medium Dave
Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4372152
Share on other sites

A few years ago i was reading a magazine (Wish I could remember which one now for reference) where they took a stock evo and gave it to a professional driver who posted some very consistent times around a track. Then the put some very expensive lightweight wheels on (same tires) which he then took out for a few laps - the result, only a few 10th's of a second quicker.

Oh, and as for the increase in sidewall issue, take into consideration a formula 1 car tire - massive sidewall...

Edit: Sorry, I re-read my post and thought it sounds a bit arrogant - just trying to back up the idea that they will make a difference, but not a big one, not trying to start an argument :(

lol F1 tyres are a tad different to street tyres mate.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4372743
Share on other sites

A few years ago i was reading a magazine (Wish I could remember which one now for reference) where they took a stock evo and gave it to a professional driver who posted some very consistent times around a track. Then the put some very expensive lightweight wheels on (same tires) which he then took out for a few laps - the result, only a few 10th's of a second quicker.

What wheels before and after?

If I remember correctly Evos come stock with either Enkeis or BBS rims. Both of which tend to be reasonably light and strong already. So going "lighter", unless you managed to score magnesium or carbon fibre rims, isn't going to be as big a gain as with the same-as-a-Maxima cast wheels (or pig iron Tempe Tyres nuggets).

Any single mod that can pull a few tenths is still a good gain. In a car that's already reasonably well designed, you'll only find a little time per mod.

As an aside there's more to wheel performance than just weight. Rigidity can make as much of a difference. Have a read of this.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4373243
Share on other sites

Ok, cant say much about handling because it was on the street so dont throw it around....but acceleration in my car was far worse when i had my 18" cast Lenso wheels (13kg each) on compared to my 17" forged Weds (6.7kgs each)

The difference in acceleration was dramatic, the 18" Lensos lasted about 3 months and then i sold them as even for street rims i didnt like how doughy my already compromised car felt

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4373270
Share on other sites

i would have to agree with all of the above ... light weight rims do make a difference..

im running p1 buddy club racing rims.. which are about 6.XX kg per rim. 17 inch tho...

i think it would be best if u look @ these kind of rims if your more on the performance side then the cosmetic side.

i feel that there is no need to go above 17inch rims for performance side of thing...

17 inch rims still can fit nice brakes behind them...

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4373688
Share on other sites

Volk GTP's 17x9.5 on my gtr are lighter compared to the stock 16x7 r33 gtst rims with stock tyres. The GTP's are among the lightest of the forged rims.

not really, they are very light (ive had a set myself), but not amongst the lightest.

Link to comment
https://www.sau.com.au/forums/topic/252628-heavy-rims/#findComment-4389217
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...