Jump to content
SAU Community

Recommended Posts

A basic turbo? There are so many different turbo's around that this question is difficult to answer.

What car is it for? New or second-hand? Whne changing the turbo you may need to check that it will bolt onto an existing manifold etc.

Prices will range from about $1500-$3500 for a new single turbo.

Link to comment
https://www.sau.com.au/forums/topic/25313-need-help-again/#findComment-537861
Share on other sites

l0n3lyangel, 2 suggestions.

1. Title your threads properly, so far the 3 you have started have been "help", "A i need some help" and "need help again".

2. If you're not sure what you need to ask, tell us what you are trying to acheive.

Link to comment
https://www.sau.com.au/forums/topic/25313-need-help-again/#findComment-537918
Share on other sites

  • 3 months later...

HI i need some 'help'

im trying to acheive getting a bolt on turbo for s 91 honda civic, and so im looking for which one i should get, the price ranges and how mcuh to install it, or if you coudl do it yourself, hope that helps. im not fused by the turbo as long as it makes it go faster, im not all that fused just the best value one?

do u get me?

if you do please reply...thanks

ps. i live in perth if anyone can help me.

Link to comment
https://www.sau.com.au/forums/topic/25313-need-help-again/#findComment-623227
Share on other sites

Posted by Mase - Today at 10:22 AM

http://www.reachout.com.au/home.asp

for all you people who need help.

hahahahahahahahhahaha.......oh...oh....oh.....hahahahahahahah......hhhhhh.....ha

hahahaha.....ooh...ooh...ooh......hahahahahahaha.

or you could try N.R.M.A for H.E.L.P.

Link to comment
https://www.sau.com.au/forums/topic/25313-need-help-again/#findComment-623504
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...