R32 Gtr With No Cooler Or Cooler Pipes

[PHA71L]

i have them off atm to clean as a turbo has died and started to leak oil into them...

and i was also going to fit the rest of my hard pipe kit......

would it be ok to drive it ONE block with no cooler or pipes? as thats were i will be changing the turbos....

[The Dan]

You won't even be able to start it with no cooler pipes on.

[TTT]

1 block? push it you lazy bastard.

[PAV34]

Yeah just push it, get a couple of mates

[V-Spec]

Yeah just push it, get a couple of mates

i thought it would start with no intake or afms

doesnt it just default to rich maps

[femno]

sure it will start.

black shit will bellow out the zorst and it wont rev.

[PHA71L]

still have afm on it starts wont idle as you would guess....

its 2 blocks come to think about haha

maybe ill just push it and put on a few beers after the boys push it haha

[R33GTRKid]

if it is djetro it will drive fine but as you said you have AFM's, guess it aint, put ya back into it

[neo32]

if uunplug

afms it will go into limp mode will be able to start and rev to abouk 2k

should be enough to get 1 block

my cooler clamp blew off on the highway car wouldnt idle or run did this to get home just be carefull u dont injest something to engin

[shanef]

drive it and u'll have to replace ur now fouled up plugs. why tempt fate? it wont be cheap to fix if it fails...

[VB-]

if you have enough length in the wiring, move the afms over infront of the throttle body, and wrap plenty of duck tape around em to seal em to the throttle body and make sure it seals. drive your 2 blocks and remove

just make sure u keep the afm's in parrellel, not series

[DaGr81]

It's a gtr though 6 throttle how can he move infront of the throttle body... You mean infront of the plenum, but I don't think they'd have such long wiring

Edited January 21, 2009 by DaGr81