Jump to content
SAU Community

Stripping Rb30det In Adel, Gt35/40, Power Fc.

mr_rbman
 Share

Recommended Posts

mr_rbman Grand Master

mr_rbman

Posted
Posted

Stripping My Rb30DET from my R32. Want to get a buyer for 75% of this gear before i start removing things from the car

so please be patient if you want one or more of the following items, deposit can be taken to secure items.

GT35/40 (xr6 turbo) 9000kms old in excellent condition, 1.06 internally gated e/h, braided oil line, water and oil return

included, upgraded 14psi adjustable actuator, custom stainless steel split dump pipe - $2000 + postage

RB20det Apexi AP Engineering Power FC with H/C - $1650 + postage (pretty rare these days)

RB25DET gearbox (has speedo mod done for R32's) - $1600 ($1150 if u give me your Rb20det gbox and speedo gear)

(have modded tailshaft for R32 manual owner's) - $400

os gieken triple plate clutch, 1000hp (freshly machined flywheel 500kms ago) when i put the clutch in it was inspected and

deemed to still be in very good condition - $1100

Custom made 'no name' rear strut brace - $80

Grenade's, 17x9" all round (+20 & +30) - look like 34 GTR rims, good bridgestone tires (225/45 70% tread all round) - $1700

RB30DET Motor:

fully rebuilt (9000kms) approximately 8.3:1 compression (safe for high boost aswell as being very torquey off boost!

hypatec pistons

king bearings

stock rods and crank (machined and balanced)

RB20det oil pump

R32 rb25de non vvt head, was inspected and freshend up with new valve stem seals etc

Custom Reground GTR Cams (gave me an extra 28 rwkw's with no extra boost)

GTR valve springs

GTR Injectors

Nismo FPR

Aerospeed adjustable cam gears

stock 'rb20' plenum and manifold

modified engine mounts

(motor built by lewis engine's)

($3500) less if u give me your Rb20det

I will not seperate anything more than i already have.

Everything but the wheels are still on the car so inspection or going for a drive is still an option for anyone interested,

I'm located south of Adelaide and would prefer local buyers unless you are willing to organise and pay for shipping etc. I'm

willing to organise postage on the turbo and power fc at your cost though. For more details on anything please either pm or

text/call Ash on 0413045900

post-16187-1232447909_thumb.jpg

post-16187-1232448305_thumb.jpg

post-16187-1232448522_thumb.jpg

mr_rbman Grand Master

mr_rbman

Posted
  • Author
Posted
man that sucks are you stripping because you cant sell the car? its so nice somone should buy the whole thing!

ye i am unfortunately, i can't bare to let it go for less than 19k so i've decided to strip it.

mr_rbman Grand Master

mr_rbman

Posted
  • Author
Posted
you selling rolling shell? what kind of price if you are?

i was going to put an rb20 back in it then sell but if i got enough for the rolling shell i'd let it go!

stenve Proficient

stenve

Posted
Posted

damn, love this car. thought about it when i was buying a few months back. just outta my price range though. surprised no one bought it. thats the market at the moment though ;)

not interested in an rb25det + cash adjustment sale for the engine are you?

anyway... good luck with the sales mate

mr_rbman Grand Master

mr_rbman

Posted
  • Author
Posted
damn, love this car. thought about it when i was buying a few months back. just outta my price range though. surprised no one bought it. thats the market at the moment though :D

not interested in an rb25det + cash adjustment sale for the engine are you?

anyway... good luck with the sales mate

ye unfortunately that is the market at the moment, would definitely prefer to sell it as a whole car as i've got it to the stage now where its a great all round package.

If you were in adelaide i would have maybe considered part trades.

I have a possible buyer for the power fc, just need someone to buy the rest of the gear now so that i can start stripping.

mr_rbman Grand Master

mr_rbman

Posted
  • Author
Posted
well let me know what you would be chasing and i'll let you know if its in my price range.

r u looking at turning it into a track car?

only reason i ask is because the car inside and out is extremely clean and registered too, not defected. would be such a shame to see it turned into just a track car, especially seeing i'd probably want more for the rolling shell than what you could probably buy a dedicated track car for. But in saying all that if you're looking at it as a street car then i'd certainly look at letting it go. All the suspension is done with virtually all new adjustable bushes, diff etc.

mr_rbman Grand Master

mr_rbman

Posted
  • Author
Posted
how much for the shell, rolling minus the 30det and g/box????

is it definately not defctd or any other authority issues????

in adelaide, hit me back with some A's

cheers nat0

i fully own it and is not defected, would be willing to put 3 months rego on it to prove it!

haven't had much chance to think about how much i'd want for the rolling shell but somwhere around 9k would see me letting it go!

mr_rbman Grand Master

mr_rbman

Posted
  • Author
Posted
interested in the clutch, push type? comes with a flywheel? can you pm me with pics and a shipping estimate to 4053, one with COD and one without? How much meat is left in it?

Regards

Ian

I believe its a push type, same as an rb20. it will come with a flywheel, can't give u pics as its still in the car at the moment, not stripping til i got a buyer for a bit more of the gear! I'll be able to do shipping for around $35. When i put it in about 500kms ago it had about 70% meat left, as long as u dont ride triple plate's they're extremely hard to wear down.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...