Jump to content
SAU Community

Recommended Posts

Hi Guys,

Got a bit of a problem which i require help with, i am getting oil into the water system and radiator but it is not the head gasket. I know this because i changed the head gasket but saying that there was nothing wrong with the old one anyway when i took the head off.

Now it is a R32 GTR and it still drives completely fine, there is no water in the enigine (oil) at all and i have been driving it around for a bout two weeks now, although i am slowly, very slowly losing oil from the engine.

So obvioulsy the oil is some how leaking into the water system, now i have a couple of ideas which i would like some help on.

Is it possible that the oil could mix into the water through the turbo?? a seal broken or something??

The other option is the water/oil trasfer thing that the oil filter bolts too??? Is it possible for this to leak oil into the water??

Any help would be great guys.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/253628-oil-in-water/
Share on other sites

Hi Guys,

Got a bit of a problem which i require help with, i am getting oil into the water system and radiator but it is not the head gasket. I know this because i changed the head gasket but saying that there was nothing wrong with the old one anyway when i took the head off.

Now it is a R32 GTR and it still drives completely fine, there is no water in the enigine (oil) at all and i have been driving it around for a bout two weeks now, although i am slowly, very slowly losing oil from the engine.

So obvioulsy the oil is some how leaking into the water system, now i have a couple of ideas which i would like some help on.

Is it possible that the oil could mix into the water through the turbo?? a seal broken or something??

The other option is the water/oil trasfer thing that the oil filter bolts too??? Is it possible for this to leak oil into the water??

Any help would be great guys.

Thanks

maybe a cracked head?

Link to comment
https://www.sau.com.au/forums/topic/253628-oil-in-water/#findComment-4383103
Share on other sites

Hey mate, see where your oil filter is screwed onto? there is a metal disc plate just off to the side which has a bolt going straight through it. that is your factory stock oil cooler. over time they can rust out as the core inside is fairly thin or the core inside separates and your oil will mix in with the water. i had the same problem when i had my 32 gtr. its an absolute c*nt trying to reach it but i did it from underneath the car. if you have skinny arms you should be right. change that cooler or fit an aftermarket cooler and it shoudl fix the problem. worked with me. i ended up blowing my head gasket two weeks later anyways. Doh. haha.

Link to comment
https://www.sau.com.au/forums/topic/253628-oil-in-water/#findComment-4386466
Share on other sites

and also if you do decide to fix it buy a new oring kit for it. if i remember it came with three o rings. two little black ones and an orange one. this kind of problem happens on old cat loaders and various trucks ive worked on. they run a similar setup too.

Link to comment
https://www.sau.com.au/forums/topic/253628-oil-in-water/#findComment-4387021
Share on other sites

  • 2 weeks later...

Hey kasmick,

Sorry to be the bearer of bad news but it definitely sounds like you have a cracked head,

the reason your not getting water in the oil is that the gallery thats cracked in the head is the oil pressure side so

oil pressure is higher than water pressure therefore the oil goes into the water,forget head gasket,heat exchanger etc.

If you like by-pass the heat exchanger to check again but i`ve experienced this many times.Theres a company here in the uk that does repaired heads,although the shipping/labour costs for shimming etc maybe too expensive.

Link to comment
https://www.sau.com.au/forums/topic/253628-oil-in-water/#findComment-4421506
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...