Jump to content
SAU Community

Recommended Posts

alright so im thinking about buying a r31 but im not quite sure what i should be looking for??<BR>what im after is a cheap r31 that i can weld the diff and mabey do few mods so i can get into drifting at a beginers type level.If i was to buy a rb30de how much  work would i have to do to it to make it kick out sideways around corners with a boot of the clutch (make it driftable)? i wanna spend bout $2000 for a clean stocker but how cheap could i pick up a turbo r31 for ? cause if i could get one turboed for 4-5 grand i would rather buy one straight out than doing it all my self.<BR>and which model is the best thanks for any info

Link to comment
https://www.sau.com.au/forums/topic/254114-thing-bout-r31-need-info-plz/
Share on other sites

buy a stocker

lock the diff

then drift that simple

ive done it before for 200 bucks

but around the 500 should get you drifting

clutches are the pricy part if you get a good one you can go for ever

if its f**ked budget 250 bucks to kick arse

so 500 should have you at the track drifting

1500 if you cant weld 3k if your f**ked and dont know what a spanner is

Dual rear sway bars is a good cheap upgrade for drift if you can pick up a sway bar at the wreckers... 31 turbos can go for as low as $2500 I guess.... seen some really nice ones for 5k. Model doesn't matter much, the S3 looks "newer" and has the sexy hotplate rear lights but other than the auto trans not much changed between models, and obviously you'd want manual.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...