Jump to content
SAU Community

Recommended Posts

SK had very set ideas on suspension setup, always saying that spring rates were the

last thing that needed upgrading, and that sway bars were the key. (He would always

bring up Oran Park as the reason soft spring rates are necessary).

I wonder what he would say about these two flow diagrams which describe the tuning

process for an M3 CSL with three way adjustable shocks..

They are at the end of an illuminating PDF that has sat on the UK's foremost M3 tuning

shop.. (Thorney).

M3 is a rear wheel drive car and every car is going to be different but to me this flow diagram

looks applicable in general to any car with adjustments..

Notice that spring rates are NOT always the last on the list to get adjusted (firmer or softer).

post-51561-1232877468_thumb.jpg

post-51561-1232877480_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/254115-suspension-setup/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yeh but they are talking about the order of adjustment, not the order of buying the parts. when u buy adjustable sway bars, alignment arms and adjustable shocks, it gives u the adjustment to play with the setup, to change spring rates u have to buy completely different springs.

What exactly are you trying to prove??

There are many different ways to sort suspension, this is obviously one way that one tunning shop uses.

I have several flow sheets similar to that with multiple different orders of importance.

Doesnt mean one is right or wrong.

I have several flow sheets similar to that with multiple different orders of importance.

Doesnt mean one is right or wrong.

Do you have one that is specific to skylines? perhaps you can post it?

I'm not trying to prove anything, but from past searches whenever suspension questions got raised the solution generally bogged down into the "sydneykid setup".. which is not available now. So I thought there should be some more info to go on.

Think the other thing to consider here is that different people like their cars to handle diferently and set the suspension up how they like, there is no set rule that MUST be followed...

Driver confidence goes a long way and thats achieved with the suspension being set up how the driver wants it, not the way that is considered "right"

I think that degree of variability is at the end. From stock I imagine most cars should get the same upgrades just like in the area of power: everyone improves a short list, the same way. And what to do first, middle and last is well understood.

But whatever.

Do you have one that is specific to skylines? perhaps you can post it?

I'm not trying to prove anything, but from past searches whenever suspension questions got raised the solution generally bogged down into the "sydneykid setup".. which is not available now. So I thought there should be some more info to go on.

since when is the "sydneykid setup" not available anymore? whiteline/selby still make sway bars, bilstein still make shocks, eibach/whiteline still make springs, whiteline still make alignment parts. the funny part is if u buy smart ull still pay less than what gary was charging in the group buy.

Do you have one that is specific to skylines? perhaps you can post it?

I'm not trying to prove anything, but from past searches whenever suspension questions got raised the solution generally bogged down into the "sydneykid setup".. which is not available now. So I thought there should be some more info to go on.

No I dont belevie in specific flow charts for specific cars. They should be seen as a guide and nothing more. Each to their own when it comes to sorting a car out.

I agree there is a criteria that people should follow when buying/upgrading parts. What you need is fairly set in stone much like engine modifications. However there is always a small minority that wont suit the general outlines. And when it comes to tuning the said parts it has to come back to the driver about any flow chart.

I know people who hire better drivers than themselves to steer the car and give input, I know people who strictly follow flow charts like that you posted, Personally, I occasoinally refer to charts but most of the time the order in which I adjust is predetermined by my own oppinion (which since im the driver is by far the most important)

I can be wrong and the car can go backwards but everything I do is logged and from mistakes I gain experiance.

Sound so oddly like something Gary once said to me.....

He has set ways for a reason. They work.

since when is the "sydneykid setup" not available anymore? whiteline/selby still make sway bars, bilstein still make shocks, eibach/whiteline still make springs, whiteline still make alignment parts. the funny part is if u buy smart ull still pay less than what gary was charging in the group buy.

You are correct the new colour of the selby bars is so much better than the canary yellow of the past too!

I bought Gary's kit for my 32 and I was very happy with it and even bought some bigger bars from him. Sure they took some time to get here but they did make it. I think more than sell parts Gary created a discussion about suspension and the use of Australian made/sourced parts that resulted in a lot of cars with better suspensions setups and more informed drivers.

I bought Gary's kit for my 32 and I was very happy with it and even bought some bigger bars from him. Sure they took some time to get here but they did make it. I think more than sell parts Gary created a discussion about suspension and the use of Australian made/sourced parts that resulted in a lot of cars with better suspensions setups and more informed drivers.

Which whiteline bits came in the kit if you don't mind me asking? did you get a product number list?

reason I'm asking is they sell more than few alternatives..

I used the front bushes at first but I ended up going for some Midori style arms...plenty adjustment :P . The GB thread has the info GB Info

As for the GB. I look at as a first step and really it is pretty much a freshen up deal for the R. I've since change and added other components...rear radius and control arms, tension rods etc. I thought the KTA117 adjustable rear upper radius arms made a big difference when I put the power down. That and the Nismo Pro TT Diff :D

I used the front bushes at first but I ended up going for some Midori style arms...plenty adjustment :P .
Where did you get the midori "style" stuff then?

I was looking at ARC (not the titanium ARC) in japan and they have some nice fully adjustable sway kits (in choice of colors!) but the price now is like 70,000 yen per end.

suspension is an easy 5 step process... just follow my flow diagram:

1. take car to centreline

2. give keys to chris

3. say "fixy fixy" and point at car

4. open wallet...

5. drive away happy

Everyone has to be good at something, no one can be an expert at everything. Your right, leave it to the experts. Any good suspension place can take your ideas about how you want the car to handle, and make it happen.

My advice is to do the lot in one go. Why stuff around adding bits and pieces and then paying over and over for allignments. Get it installed, get the right settings put in place and go racing!

suspension is an easy 5 step process... just follow my flow diagram:

1. take car to centreline

2. give keys to chris

3. say "fixy fixy" and point at car

4. open wallet...

5. drive away happy

6. complain about how much u spend on ur skyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...