Jump to content
SAU Community

Recommended Posts

I'm looking to replace my bonnet in the future and leaning towards some of the bonnets from Unique Autosports, either fibre glass, or fibreglass with a carbon fibre wrap.

I'm aware that if i just bolt it straight on, i run the risk of being defected - fair enough.

What i'd like to know before going ahead and purchasing one, has anyone gone to the trouble of getting a bonnet such as these engineered? I've done some searching on the forums but i can't find much, so if anyone on here has had any experience, particularly in NSW i would be interested to hear it.

We have tried numerous avenues to try and get some sort of authority to approve fibreglass or carbon panels but we haven't had any luck. And before someone says "Blits have ADR approved hoods", they DON'T. Not only is this claim false, they don't even have a certificate Queensland Transport is happy to sign off on. It's a marketing gimmick that seems to have done very well for them. I'll keep searching for any sort of documentation we can provide our customers with to help with the boys in blue, as I feel your pain.

Thanks mate, that's exactly what i'm after, some real experience.

As for Blits, how can they be claiming to have ADR approval if they don't? From what i've gathered from their site they claim to have some sort of general approval but no ADR number. I'm really not clear on what all this means, hence why i'm asking here.

Nope.. they actually claimed it to be ADR approved. It was in an un-named magazine.. from which one of our own SAU members won the "ADR APPROVED BLITS BONNET"

Big bold writing on the top of the promotion :)

MRXTCZ

Read their website.. Says they meet all ADR approved standards but do NOT have ADR approval.. As yes they must be crash tested, in which they havent done.. instead they got QLD Transport approval.. So may be the fact that you get a QLD transport letter stating that in QLD it's ok do have the bonnet..

Now i swear a while ago they stated ADR.. hmmm

i have a fiber glass bonnet with carben fibre inserts which i got defected for but took it to regency with the bonnet on and the approved it so maybe they were having a ggod day lol

Read their website.. Says they meet all ADR approved standards but do NOT have ADR approval.. As yes they must be crash tested, in which they havent done.. instead they got QLD Transport approval.. So may be the fact that you get a QLD transport letter stating that in QLD it's ok do have the bonnet..

Now i swear a while ago they stated ADR.. hmmm

From what I gather talking to various people the certificate doesn't even cover you with Queensland Transport, let alone any other state. It's a bit hit and miss, as the certificate only states they meet certain requirements, however it's not official as it's issued by themselves and I believe they do not have the authority to state that the product actually passes those requirements.

Thought i'd send Blits an e-mail and try to get some clarification, they sent this info back

as far as transport goes as they are engineered to federal ADR standards and each

bonnet is registered to each vin number and rego number of each vehicle they

go on as they are numbered ( the bonnets) they are okay in NSW ,if it

changes, as I have your details I will be able to make the changes and

contact you with the details for you, but there is no problem at the moment

and I can't see that changing ,the worst it would be is you would have to

have it sighted by NSW transport and they to then give you a certified

letter of approval which I would arrange for you

Has anyone had any luck getting an engineers certificate for an aftermarket bonnet? Seems like this would probably be the best option if it's possible.

I honestly didn't think it was possible, however I'm more than happy to be proven wrong. Although having said that one of our customers has seeked approval through his local authorities.

they are approved here in qld we got a few cars running them, as mentioned under the bonnet is the serial # registered to the vehicle, u have to be careful not to respray over this then ur stuffed. but i dunno bout other states, NSW is stupid for defects i remember when i used to live there

ben...

Do you know if it was a fibreglass bonnet, or carbon fibre/carbon fibre top layer?

Pretty sure it was fibreglass. I can't seem to find the email the customer sent after he got approval.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...