Jump to content
SAU Community

Recommended Posts

http://www.datsunrestore.com/h4_bright_white_kit.html

this way you can use any bulb you want and you can get that VIP lexus look with your lights.. well that was my dream anyway and now it's possible!

Link to comment
https://www.sau.com.au/forums/topic/254500-thought-these-were-quite-clever/
Share on other sites

just gunna ring the guys first and make sure Australia delivery is all cool and if so, make sure the two different pairs are put in the same shipment.

that would save me a few bucks in shipping no??

but yes im gunna get some.. as i think it would look the sex...

I'm confused. What's so special about these? They're a standard semi sealed kit, no?

I fitted these to my 180B over 20 years ago. Hardly anything new there.

You can buy the same from Hella, Narva, Supa cheap or just about any car accessories shop in Australia.

By the time you convert the $$ and pay postage, you will get good quality stuff here in Oz with a warranty.

Dude at Ausrotary selling kits here: http://www.ausrotary.com/viewtopic.php?f=48&t=139477

Edited by warps
grabbing some off this lad. thanks for the link!

Yep - Simon's a good fellow. He knows his auto electrics - has provided lots of valuable info over the years. He's written some excellent tech posts on setting up thermo fans, relocating batteries to the boot, and upgrading alternators (although the alt upgrades are Mazda specific).

You might find that you have to upgrade the wiring to your lights as well. I dare say that the (cheap) original wiring in your Dat won't be up to the task ,and have some massive losses. Running new wiring with relays, and proper battery feed will make even the standard sealed beam candles much brighter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...