Jump to content
SAU Community

Recommended Posts

hi guys, every now and then the hicus light will come on and stay solid, the steering wheel will be very stiff at that point, however the car doesnt seem in limp mode as it performs normally engine wise...

i tried the diagnostic thing:

1) start car

2) within two second turn left to right 5 times

3) brake 5 times (then hicus light comes on solid)

4) move forward for a 5 metres less then 10km/h and stop

but hicus light jsut stays solid and sometimes even doing that test makes my steering stiff again =/

Link to comment
https://www.sau.com.au/forums/topic/254727-hicus-light-staying-solid/
Share on other sites

wow so sorry guys i totally forgot to type up the car (doing work and forum[ing] )

its a 1993 r33 problem, power steering fluid is topped up fine..

The likely causes are:

Steering wheel sensor (behind steering wheel)

Pressure Sensor (behind alternator on PS line)

Electric motor (on steering rack at back)

HICAS computer (Parcel shelf in boot I think in that model)

Check the wiring connections to the motor on the rack at the rear and clean with contact cleaner.

Take off the steering wheel and ensure the sensor is in the correct position and also the steering wheel you have is the correct one with the correct boss kit.

You can test the pressure switch but it probably not going to be the cause.

bummer, i have an after market momo steering wheel which cam ewith the car... any picture guides on how to check the above? im new to skylines

I'm guessing that your after market BOSS kit isn't HICAS compatible & causing the steering wheel sensor problems. My car (also a 1993 model) does something similar & I have a cheapo steering wheel with some china rip-off boss kit (HKB? anyone?) & my HICAS light goes on when I drive @ 100km/h for about 5 or so minutes. Although my steering wheel doesn't go stiff when my HICAS light is on...

bummer, i have an after market momo steering wheel which cam ewith the car... any picture guides on how to check the above? im new to skylines

Take the steering wheel off with BOSS attached and take a photo of the bottom of the BOSS and photo of the steering sensor. Also check to make sure it is even plugged in.

  • 2 weeks later...

I've got the exact same problem in a 93 GTST.

HICAS light stays on, power steering goes heavy, light turns off and steering returns to normal after driving for a while(seems to get longer and longer before it returns to normal). Shits me completely!

I have the normal non air-bag s1 steering wheel. I've never been able to run the diagnostic either, never had trouble with any other fandangled diagnostics in the past, just this one can't seem to get working. I'll have to pop in to someone I know who has a scanner one of these days.

Topped up power steering. Checked and reseated all the fuses, but haven't checked(read- "banged on") those motors you guys mentioned to see if it makes a difference.

  • 4 weeks later...

okay here are the pictures requested.. i appreciate the help... i take it the only thing that makes this kit hicas compatible is the two holes in it....

so am i supposed to make sure the square part on my steering column slides into one of those holes and the long clip slides into the other?

also what are the 4 pins inside that square part on my steering columb? (i know 1 is power for the horn)

06032009157.jpg

06032009160.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...