Jump to content
SAU Community

Recommended Posts

Hi all,

Its time for another garage cleanout and as usual I have a stack of parts laying around that are going to waste and must go.

1. FET Power Direct Coil Packs (Model Number FPC-001)

post-46-1233275617_thumb.jpg

FET Power Direct Coils are a high quality Japanese made replacement upgraded coil pack for Nissan RB engines, and are essentially the same as those produced by Splitfire as a drop in replacement. The only real difference is the colour of the coils themselves, in that FET coils are red, and Splitfires are blue. These are in excellent condition and are great value considering the current price of a new set of Splitfires!

Please note these are NOT cheap Chinese coil packs

These coils use the same vehicle compatibility designation as Splitfire, and being 001's they will suit the following:

- R32 GTS-T (RB20)

- R32 GTR (RB26)

- R33 GTS-T (Series 1 RB25 only)

- R33 GTR

I am asking $390.00 Firm

2. Genuine R34 GTR Factory Injectors - Excellent Condition

post-46-1233275621_thumb.jpg

I have one set of excellent condition R34 GTR RB26 Factory Injectors that have only travelled 20,000 Km's

Perfect upgrade for an RB20, or a cheap and reliable replacement for old and busted R32 or R33 GTR injectors.

I am asking $360.00 Firm

3. Brand New 400R Clear Front Bar Indicators - R33 GTR

post-46-1233275630_thumb.jpg

This is a brand new set of Clear 400R Type Front Bar Indicators to suit Skyline R33 GTR that I purchased from Japan some time ago. I ended up with 2 sets so I had no need for these ones.

They are a direct fit replacement for the factory amber lenses and are a great aesthetic enhancement for any R33 GTR!

I am asking $185.00 Firm

4. Brand New Carbon Fibre N1 Front Bar Vents - R33 GTR

post-46-1233275637_thumb.jpg

I have this Brand New set of Carbon Fibre N1 Front Bar Ducts that I ordered from Japan for my R33 GTR and never got around to fitting. These are very very well made and look awesome when fitted, especially if you are chasing the full on JDM look :) I paid a packet for these but given they are just sitting on my shelf looking pretty its time to let them go.

I am asking $175.00 Firm

5. Used Factory ECU - Nissan Skyline R33 GTR

post-46-1233275335_thumb.jpg

This is the factory ECU out of my R33 GTR that was replaced by my Apexi Power FC.

These are very very handy and worthwhile holding on, especially as a backup in case you are defected.

I have no use for this so its just sitting around and like the other bits its time to go.

6. Brand New Tomei Engine Cover Ornament - RB26DETT

post-46-1233275546_thumb.jpg

Brand New Genuine Tomei Coil Cover Emblem/Badge for RB26.

This was to be fitted to a new set of painted engine covers I had ready to go on but it never quite made it on to the car.

I am asking $165.00 Firm

7. Used Factory Coil Pack Loom & Ignition Module - R32 GTS-T/R33 GTS-T Series 1

post-46-1233275611_thumb.jpg

I had this on hand as a spare. I never ended up needing it and it is now of no use to me.

I am asking $150.00 Firm for both items

All parts located in North Sydney - Happy to post at the buyers expense.

Come and get it :D

Cheers.

dang

thanks anyways g luck with teh sale >_<

Lots of pm's but the majority of this gear is still available :rant:

First in best dressed! It all must go!!!!!

Hey mate,

Very Interested in the INjectors, PM me or Call me on 0419 225 146 as im in need of these ASAP .

Cheers, Daniel .

  • 3 weeks later...
would you take $100 for clear 33GTR indicators?

Sorry Simon, but no.

They are brand new and being sold at less than their replacement value already.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 12+ months passed so they have no obligation to do a warranty claim. It leaked from the rear circuit. Front circuit was fine, but I tried many times to bench-bleed and in-car bleed (wasted 1L of Penrite racing brake fluid) to no avail. Threw my old BM50 or whatever the standard R32 GT-R BMC is, brakes went back to normal. So from my very limited anecdotal experience, I cannot recommend HFM, even though a lot of their products looks good. Just my experience (I have a genuine Nissan BM57 in a box waiting to be installed now).
    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
×
×
  • Create New...