Jump to content
SAU Community

Recommended Posts

Hi,

I will shortly pulling my RB25DET from my R33 GTST S1 along with the PowerFc and Handcontroller

Engine is currently at 120,000 kms, and is available with :

GT3076 turbo - 8000km from new

Splitfire coilpacks again 8000 km's from new

Z32 and the custome pipework to plumb in the turbo to the stock BOV, and inlet equipment.

ECR 33 PowerFC and Handcontroller along with original box and instructions (in Japanese).

I have a brand new set of SARD 850cc injectors still in their sealed packs for the RB25 .

Prefer to sell engine compete - although I will be keeping the power steering pump, alternator and air con pump for the RB30/26 going in, will consider splitting if the price is right.

I also have a second complete RB25 head, a bare RB25 head and an RB25 inlet plenum.

EOI please by PM along with price and I will respond to start the discussion. Deposit will be required to reserve parts. Timeline is likely to be 6/7 weeks.

Engine is currently in car, so pictures will be difficult at the moment, but will try if deemed required.

Thanks

interested in the turbo mate are you willing to seperate also is it internal gate?

Internal gate - fits standard low mount manifold with the supplied spacer.

Do you want to make an offer??

just a little cut and paste from the for sale section. perhaps sticking a price on your ad would be helpful.

1. When starting a new thread, you must include a set price, or at the very least a ballpark figure that you are looking for. EOI's are not permitted, if you want to auction your gear then use e-bay
just a little cut and paste from the for sale section. perhaps sticking a price on your ad would be helpful.

Thanks for the post -

$1700 for turbo including spacer and all lines

$1300 for Powerfc and Handcontroller in box with manuals

$400 for Coilpacks (splitfire)

$850 for the Set of six new SARD 850cc injectors

Complete engine, minus above would be c.$2500

IF the engine is split, then POA

Thanks for the post -

$1700 for turbo including spacer and all lines

$1300 for Powerfc and Handcontroller in box with manuals

$400 for Coilpacks (splitfire)

$850 for the Set of six new SARD 850cc injectors

Complete engine, minus above would be c.$2500

IF the engine is split, then POA

Price drop on Injectors to $700 also listed on ebay

post-44656-1233445933_thumb.jpg

post-44656-1233445962_thumb.jpg

Price drop on Injectors to $700 also listed on ebay

post-44656-1233445933_thumb.jpg

post-44656-1233445962_thumb.jpg

Injectors currently "selling" on ebay for a bid of $500. If anyone want s them prior to auction finishing, let me know!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...