Jump to content
SAU Community

Recommended Posts

Hi,

I will shortly pulling my RB25DET from my R33 GTST S1 along with the PowerFc and Handcontroller

Engine is currently at 120,000 kms, and is available with :

GT3076 turbo - 8000km from new

Splitfire coilpacks again 8000 km's from new

Z32 and the custome pipework to plumb in the turbo to the stock BOV, and inlet equipment.

ECR 33 PowerFC and Handcontroller along with original box and instructions (in Japanese).

I have a brand new set of SARD 850cc injectors still in their sealed packs for the RB25 .

Prefer to sell engine compete - although I will be keeping the power steering pump, alternator and air con pump for the RB30/26 going in, will consider splitting if the price is right.

I also have a second complete RB25 head, a bare RB25 head and an RB25 inlet plenum.

EOI please by PM along with price and I will respond to start the discussion. Deposit will be required to reserve parts. Timeline is likely to be 6/7 weeks.

Engine is currently in car, so pictures will be difficult at the moment, but will try if deemed required.

Thanks

interested in the turbo mate are you willing to seperate also is it internal gate?

Internal gate - fits standard low mount manifold with the supplied spacer.

Do you want to make an offer??

just a little cut and paste from the for sale section. perhaps sticking a price on your ad would be helpful.

1. When starting a new thread, you must include a set price, or at the very least a ballpark figure that you are looking for. EOI's are not permitted, if you want to auction your gear then use e-bay
just a little cut and paste from the for sale section. perhaps sticking a price on your ad would be helpful.

Thanks for the post -

$1700 for turbo including spacer and all lines

$1300 for Powerfc and Handcontroller in box with manuals

$400 for Coilpacks (splitfire)

$850 for the Set of six new SARD 850cc injectors

Complete engine, minus above would be c.$2500

IF the engine is split, then POA

Thanks for the post -

$1700 for turbo including spacer and all lines

$1300 for Powerfc and Handcontroller in box with manuals

$400 for Coilpacks (splitfire)

$850 for the Set of six new SARD 850cc injectors

Complete engine, minus above would be c.$2500

IF the engine is split, then POA

Price drop on Injectors to $700 also listed on ebay

post-44656-1233445933_thumb.jpg

post-44656-1233445962_thumb.jpg

Price drop on Injectors to $700 also listed on ebay

post-44656-1233445933_thumb.jpg

post-44656-1233445962_thumb.jpg

Injectors currently "selling" on ebay for a bid of $500. If anyone want s them prior to auction finishing, let me know!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If we're going after market gauges, I'm a big fan of Australian made... Get some RedArc!
    • Unless you're fortunate enough to buy a newer car, getting an older style plate to match your name/car is difficult because they've already been purchased.  Unlike other countries, personalised plates are locked to the country and not region, so there can't be multiple versions of the same plate but with a different area code.  Hope that helps
    • People use the numbers to make it look like letters to spell words/names, which is where the illegal spacing comes in. For example this GR Yaris  
    • Today's rock removal from my stock pile out the back into a 4m³ skip bin, I still have a bit to go, hopefully there's enough room in the skip bin, it will be close My daughter and her boy was coming on Sunday to help, but, I got possessed by demons and started work as soon as the bin arrived at 1230 today Lots and lots of barrow loads were achieved  Currently I'm sitting on the lounge drinking beer thinking of how I should have waited till Sunday for some help, tomorrow will be a day off, in saying this, my day off will involve prep and paint of my alloy coolant and PS tanks with wrinkle paint (Jackie is in Sydney till Sunday so the home oven will get a run curing the paint....LOL)
    • That's why I said it is a meaningless term. Because there is more than one meaning that people can apply to it. When we said "highflow", that is exactly what we mean, and exactly what is done. In a highflow, they take your housing and machine them out to take bigger wheels, have a better internal profile, etc etc, and fit a new core with the different/better/bigger wheels.
×
×
  • Create New...