Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Well i got it imported picked it up about 3 weeks ago just got exhaust, pod, front mount, running stock boost as far as i know. This is how it got through the pits to. This week the guy that has worked on all my cars wants to play with it abit also the boost controlla is going in as well. Getting lowered, tint, boost guage and few other things should be nice. Thanks for all your help hope to meet some of ya's soon.

Well i got it imported picked it up about 3 weeks ago just got exhaust, pod, front mount, running stock boost as far as i know. This is how it got through the pits to. This week the guy that has worked on all my cars wants to play with it abit also the boost controlla is going in as well. Getting lowered, tint, boost guage and few other things should be nice. Thanks for all your help hope to meet some of ya's soon.

One thing I will add, my car has been popping heaps more flames over the last week than usual... perhaps the heat is affecting it, but i blew some doozies this evening

-D

i think its time for a lap of the block :sick:

think my zorst is too full of carbon... more likely to blow a nice black cloud than a nice blue flame

im gonna have to invest in a decent dual pipe system, individual pipe with hiflow cat from each turbo...

2x turbo -> dump pipe -> hiflow cat -> resonator -> junBL muffler

should sound decent methinks. can use smaller piping if theyre parallel so that means i got more ground clearance

-D

i think i was the master of flames and pops and BANGS wen my bee-r was on

and sum people would agreez lol

oh yeh its nathan aka jdm032 aka jet lag aka screamer boy aka smart ass aka the awesomeness aka that kid aka the annoying one lol

HI

(dont ban me my jdm account stopped working and wouldnt let me post

but back on topic, ur car will be running rich or timing may be out by a degree or two, also if your cat is gutted and ur exhaust system is fairly simple then it will

i had a decent custom made jap system on mine and i was getting flames crawling up the bumper onto the boot at 100 kmph, looked soooo good, and it doesnt hurt to burn off extra fuel lol

*edit* a metre, is that all, come on u can do better then that, if you pick up in first at a slow but steady rate to 7 then to 6 in second and let it idle down, touch the accelerator, and i mean just touch it once to only slighty open the throttle you should get flames coming out for easy double that length and for a few seconds, (yes it does work, i have tried it and succeded lol)

Edited by Dori-Dori
Bee*R ftmfw

gotta get me one of those.

if i had one i would drive everywhere in 1st on the limiter

sorry. bee'r rev limiters are f**king gay

there is nothing 'cool' about making bangs from detonating petrol. if you want some bang, i'll chuck two pieces of c4 in a directional shaped charge around the main support strut of your house, facing each other, and blow the f**ker down with under a kilo of plastique.

bangs for the sake of a highly tuned, hi octane engine are hot because of the engineering and tweaking that goes behind it.

any daft fool can tune an ecu to spit fuel into the exhaust manifold. and you always used to chuck that shit around residential areas. as someone whos been shot at before, i really dont see the humor in that.

one day son, we are going to meet.

-D

sorry. bee'r rev limiters are f**king gay

there is nothing 'cool' about making bangs from detonating petrol. if you want some bang, i'll chuck two pieces of c4 in a directional shaped charge around the main support strut of your house, facing each other, and blow the f**ker down with under a kilo of plastique.

bangs for the sake of a highly tuned, hi octane engine are hot because of the engineering and tweaking that goes behind it.

any daft fool can tune an ecu to spit fuel into the exhaust manifold. and you always used to chuck that shit around residential areas. as someone whos been shot at before, i really dont see the humor in that.

one day son, we are going to meet.

-D

awesome i look forward to it, but dont sit behind me >_<

and i really dont care, i am me, i do wat i want, i do it where i want

and btw, dohmar, a bee-r is functional. i had it hooked up for anti lag as well as fun, its a full proper launch control and anti lag built by one of the better jap tuning companies called well Bee-R

so before u go saying is not functional, do some home work and learn bout things.

and bezender if you get one, i can hook it up in a flash, i should be getting mine installed again soon, so if ya need tips or help pm me...

usually im all about function over form... but i like em.

I'd be happy to burn my petrol at the hands of a bee*r limiter. i reckon it would be good fun >_<

Cool. Remind yourself to not get pissed off when I tie a rope of firecrackers around your postbox at 4am. Or chuck a block of thermite on your rolla. Yeah. you'd think twice about burnination after that shit

-D

Cool. Remind yourself to not get pissed off when I tie a rope of firecrackers around your postbox at 4am. Or chuck a block of thermite on your rolla. Yeah. you'd think twice about burnination after that shit

-D

A screamer is for a racing application. Its bullshit to compare apples and oranges. Its fair enough on a racetrack, where you actually DO hit those 8000rpm. When ur in the streets, if u hit 8000 rpm you're basically a prime dickhead.

What sort of cockhead dumps fuel at night in a residential area? I'd say you, and you alone. You've f**ked with kellies cruises enough, disregarded her guidelines, and for what? To prove that ur dick is smaller than what an electron microscope can pick up? You're a tool. You shit on everyone who owns a skyline. Get a clue before someone imprints it on your skull with a piece of 2x4.

Call me out Nathan. You've been dissed before by more than a few on these boards. When will you get the hint? Heros are zeros.

You know where to find me.

-Dohmar

haha nice. screamers can be cool, but not exactly neighborhood friendly >_<

can hear my mates rx4 from so far away its not funny when its on boost...

my neighbors still like me atm, id like to keep it that way

all my neighbours hate me and i got a 3 cops living within a 5 minute walk, but they leave me and my mates alone. they dont like us but they dont give us grief and we dont disturb them

plus my car sits between a house and a shed and metal fence, straight pipes very loud lol, especially when reving and playing with afr maps haha

all my neighbours hate me and i got a 3 cops living within a 5 minute walk, but they leave me and my mates alone. they dont like us but they dont give us grief and we dont disturb them

plus my car sits between a house and a shed and metal fence, straight pipes very loud lol, especially when reving and playing with afr maps haha

How wonderful for you. One day, one of those benign neighbours you love to torment will leave a kilogram of thermite upon your hood and burn a hole the size of an orange right thru ur engine block.

Oh hey and Im not saying I did it. I just would do it.

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...