Jump to content
SAU Community

Recommended Posts

Fitting the std 33 turbo will be cheaper, high flowing your 20 turbo will cost lots, i called turbo tech a while back when i screwed my turbo and they wanted a kidney.... at least....

As far as performance, most people get at least 250 hp at the rears on a std 33 turbo as long as you have some for of fuel controlling device ie SAFC or something... as for high flowed 20 you would probably have to dig about for the results.

Reliability, the 33 turbo is still standard and can (im not saying they all do) shart a rear turbine wheel off... The high flow would be steel wheels and capable of longer life and higher boost. std 33 turbos dont really like 15 pounds of boobs. I do.

Ive personally gone from a std 20 turbo, to a std 33 turbo and now a high flowed 33 turbo, the high flow 33 turbo is un-goddam-believeable, the power up the top end is awesome, but at the same time ,smooth.

At a guess i'd say the high flowed 20 would be better for midrange?

Hope this helps.

Good luck with it all.

Be prepared to have a few bolts snap, or gasket replacement, or, and this is my personal favourite, "you have snapped manifold bolts, 4 to be precise".... or generally some form of pain in the ass. 32's are known for the "EXTRA WORK NEEDED" line from your mechanic.... *looks at my wallet* >_<

Still there is nothing quite like it when all of a sudden at 3500 rpm it pushes you back into the seat.

ENJOY!

33 turbo for cheap horsepower (get a series 1 item, mine has been going hard on my RB20 and now RB30). ~250rwhp out of an untuned RB20, just make sure you have a new fuel pump as the old stocker probably won't keep up.

VG30 turbo is the same size as an RB25 Neo turbo.

I have a neo hiflow on my Stag, it's stupidly large, takes ages to spool but makes 320awhp @ 12psi.

Nissan went with the nylon wheel to get it to spool faster. I really don't think they had people running them at 12-14psi in mind.

Ask around and see how many people have blown series2 turbo's when winding a bit of boost into them.. my series1 turbo has been running 12psi on my RB20 for over a year and now on my RB30 for 1.5years, still going strong.

I have seen countless topics on max boost for the rb25 turbo, to be honest i havent notcied any larger number in s2 failures then s1 but that doesnt mean your not wrong. I have seen lots of results comparing 10psi to 14psi and the max power figure didnt change, however the midrange was improved on the higher psi runs. So then in theory if the S2 turbo spools up quicker as you say, then that would be an improvement in the midrange without needing to up the boost anyways. But thats just my opinion at the end of the day i cant say for sure but thats just what i reckon. Sauwa wouldnt be the same if i didnt get to disagree with you Bubba. :(

HOW DARE YOU DISAGREE WITH ME?! :(

Nah, a couple of members had their s2 turbos shit themselves not longer after they got the cars and wound some boost in.

The main thing that goes in RB20/25 turbos is the exhaust turbine (due to it being ceramic and seeing excessive heat when leant on). I have seen failures of the compressor wheel in s2 turbos but not in s1 (probably due to the fact that it is a steel wheel).

Lastly, if mine can survive the hammering it took on my RB20 AND survive the hammering on the RB30 (where it is actually a restriction, I'm sure the thing must glow when I spend much time around 6000rpm!) it must be a good thing :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...