Jump to content
SAU Community

Recommended Posts

Hey guys,

Before I owned a skyline I had a massive interest in them (as most people do) but had noticed that alot of people who I knew and had spoken to had problems with the idle on these cars.

After buying one myself I hadn't noticed it, until maybe the second month.

Revs were very erratic, jumping up and down, and even stalling a couple of times.

I had spoken to a few people regarding my own car and they had said it may be a vacuum leak, etc etc.

Then my boys car started playing up too so I decided we needed to do something, numerous mechanics had suggested many different things to try so we could figure it out but I, and my boy had both decided we didn't want to waste money guessing.

I work for Toyota and one of the mechanics also has a skyline, luckily for me he is very talented at what he does and didn't just guess or take a stab in the dark like so many other people I had spoken to suggested doing.

Turns out the throttle body and air flow just needed a clean, a problem that was causing my car to stall and be a pain in the *** took about 15 minutes to fix??? How could it be!

I know a few people have/are experiencing this problem so this is just a little tip instead of wasting your money guessing and trouble shooting.

This is really common when you have a pod filter.

Dirty throttle body = faulty signals to TPC and erratic idling.

Even just as a maintenance thing I would suggest it :D

Thanks guys.

Edited by MZBLTZ
Link to comment
https://www.sau.com.au/forums/topic/255131-erratic-idling/
Share on other sites

  • 2 weeks later...

How do i actualy clean it out, just starting to get into the mechanics of cars ect and not sure what you need to do to clean out the throttle body and air flow.

If some one has some sort of step by step and some pics may help

cheers!

Link to comment
https://www.sau.com.au/forums/topic/255131-erratic-idling/#findComment-4425406
Share on other sites

How do i actualy clean it out, just starting to get into the mechanics of cars ect and not sure what you need to do to clean out the throttle body and air flow.

If some one has some sort of step by step and some pics may help

cheers!

to clean your throttle body

get your engine warm (leave it to run for about 5mins) and switch it off.

remove the induction pipe coming of either your intercooler or your air filter. usually just take of the hose clamps holding the rubber hose and you should b able to see the throttle butterfly. you might need to take of a couple of other vac hoses or bolts (i cant remmber the setup on a rb20 but it should be similar to the setup on a rb25)

you can get a can of crc carburettor and throttle body cleaner from bursons or repco for like $10 max.

open up the butterfly by pulling on the accelerator cable. spray some crc into the throttle body and wipe inside with a clean rag, youll see how much dirt is built up inside. especially where the butterfly sits.

put everything back together and tighten hose clamps.

when you go to start the car itll take a little bit longer than normal because of the crc stuff inside the engine and have a rough idle for a bout a minute. pump the accelerator n it should clear up.

Link to comment
https://www.sau.com.au/forums/topic/255131-erratic-idling/#findComment-4425472
Share on other sites

If you have a pod filter (And even if you don't) clean your AFM. It'll help MAJORLY.

Pod filters often are filled with oil, this sucks onto the AFM, and stops the air flow from cooling the hot wire, which makes the ECU think there is different amounts of air going in to what there is.

To clean the IAC valve the easy way, go to Subaru, buy a can of Subaru upper engine cleaner.

Follow the directions on the can.

Link to comment
https://www.sau.com.au/forums/topic/255131-erratic-idling/#findComment-4425703
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...