Jump to content
SAU Community

Recommended Posts

fd_irw08_toshiking_photo_otsuki005.jpg

Hi All,

The Tuners Group is very proud to announce that we have been appointed by Works Bell in Japan to find a new home and owner for Toshiki Yoshioka's legendary AE86 drift car.

For sale is Yoshioka's car, which he has campaigned with enormous success and with which he won the Las Vegas round of Formula D in 2008 where he stunned the US drifting community with the mindblowing speed of his AE86.

This car is without doubt one of the most developed, most advanced, and most successful AE86's on the planet.

fd_04.jpg

The specs list is completely mindblowing.

No expense has been spared in building this car - we are advised that Team Droo-P spent roughly 8,000,000 Japanese Yen on building this car. That amount spent to build the car is approximately US $87,000 / Euro 68,000 / Sterling £61,400 / UAE Dirhams 320,000 / Australian $134,000 on today's exchange rate !

The asking price represents outstanding value, and is WAY below what it would cost to try to build a car with equivalent specs from scratch.

US$87,000 is what it cost to build, not the asking price for the sale of the car. The asking price for the sale of the car is WAY below the build cost.

fd_irw08_toshiking_photo_otsuki009.jpg

You can check out the specs list and a photo gallery, videos etc at ...

http://www.tunersgroup.com/yoshioka_ae86.html

As we definitely want this car to go to a good home, we'd definitely appreciate people's help in getting the word out about this car, so if you are a member of any drift forums or AE86 forums, feel free to repost this post.

- Adam

  • 3 weeks later...
  • 3 months later...

large769.jpg

PRICE DROP IN SOME CURRENCIES DUE TO CHANGES IN JAPANESE YEN EXCHANGE RATE

Hi All,

As we noted when Yoshioka's AE86 and the extensive spares package was put on the market, the Japanese Yen was very strong, particularly against the Australian dollar and a number of other currencies.

The price in Japanese Yen of JPY 3,500,000 is still the same, but due to recent changes in the Japanese Yen exchange rate, the price of the car in Australian Dollars and a number of other currencies is now much lower ...

When the car was put on the market, the price of JPY 3,500,000 was equivalent to Australian $59,500.

On today's exchange rate, the price of JPY 3,500,000 for the car and extensive spares package is now equivalent to Australian $45,477.

Compared to the price when this car was first put on the market, this is a saving in Australian Dollar equivalent terms of more than AU$14,000 (a saving of roughly 23.5%)

Due to the changes in exchange rates of various currencies compared to the Japanese Yen, as at exchange rates on 16 June 2009, the Japanese price equivalent in:

- Australian Dollars has dropped from AU$59,500 to AU$45,477 (a saving of approx AU$14,000 or approx 23.5%)

- US Dollars has dropped from US$38,000 to US$36,263 (a saving of approx US$1,737)

- Euro has dropped from Euro 30,150 to Euro 26,155 (a saving of approx Euro 3,995)

- English Sterling £ has dropped from English Sterling £26,700 to English Sterling £22,106 (a saving of approx £ 4,594)

- UAE Dirhams has dropped from UAE Dirhams 139,885 to UAE Dirhams 133,155 (a saving of approx UAE Dirhams 6,730).

We are advised that Team Droo-P spent roughly Japanese Yen 8,000,000 on building this car. The asking price of Japanese Yen 3,500,000 is less than half this amount.

Full specs, photos, videos, details of the extensive spares package, and more info can be found on The Tuners Group website at ...

http://www.tunersgroup.com/yoshioka_ae86.html

- Adam



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...