Jump to content
SAU Community

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

not all defects need roadworthys you can get defected and only have to get it cleared at vic roads it all depends on what the cop puts on the form i got defected but didnt need a roadworthy all i had to do was get it cleared at vicroads. it all depends what the cops say and they put on the defect form.

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4417879
Share on other sites

You definitely have a S1.5, which requires an airbag wheel.

My mate removed his airbag globe from his dash when he had to get a roadworthy, as the light was always on, and failed inspection as the airbag light did not come on when the inspector turned the key. Mind you he still had the std airbag wheel fitted, so if you where to fit a non-airbag wheel it would probably pass as the inspector may be non-the-wiser.

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4418157
Share on other sites

is that wire the only loose wire in the steering column,

was it connected to anything before with the old steering wheel.

the airbag light problem could've came up when you remove the old steering wheel if the previuos owner put a resistor in the Airbag plug but it got knocked or pulled out when you removed your old steering wheel.

hope that makes sense :D

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4418366
Share on other sites

His car is in the mechanics now getting a proper wheel put on... IN THE PROCESS OF DOING THIS.. the shop had something of interest we liked... thought wed take some pictures and show you peeps.. what do you guys think..? :D:P:(:P:P

post-45807-1234248967_thumb.jpg

post-45807-1234249003_thumb.jpg

post-45807-1234249090_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4418480
Share on other sites

Just wondering, only just read me defect notice tonight, if im reading correctly you have 7 days to drive the car, after those 7 days you can only drive the car for another 21 days to have it tested or repaired AFTER the defects have been fixed, after that time the rego is suspended, is that right?

I have attached a front and back copy of my defect, the bits im referring are the first instructional bit on the back which refers to section 4 on the front but section 7 says that i have up untill the 4th of march before the rego is suspended.

post-27276-1234346358_thumb.jpg

post-27276-1234346388_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/255886-defected/page/4/#findComment-4420919
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...