Jump to content
SAU Community

Recommended Posts

group buy till end of march

some very sweet rims for your gtr/ gts

i get a discount on these bad boys so if you want a set get in quick

they are similar to the drifteks however have more dish on the spoke and a nice smoked black...they are also lighter than drift teks

ripped from the web page

Coming in late March 2009, these fat-looking 5-spoke wheels have a 5x114.3mm bolt pattern to suit Nissan, Toyota and Mazda with offsets to suit wide-body drift cars and GT-Rs. There are three sizes available, all finished in ‘hyper black’

P-45R.jpg

sizes

17x9.0 +25 $339 rrp fatz price $306

17x9.5 +12 $349 rrp fatz price $315

18x9.5 +12 $389 rrp fatz price $321

shipping prices

Price per wheel, no tyres:

NSW, QLD, VIC $15

TAS, SA $20

WA, NT $30

anyway if you want some

pretty simple

pick the rim then add the delivery dump it into my account

when they arrive mid march they will be at your door step

if you buy a set i need your full address mobile number and full name

enjoy

fatz

0448468884

bank details:

peter carruthers

bsb 112-879

acc number 428 965 807

ive had about 3 sets of rota and ive goten about 30 sets for my fellow r31 lovers not one drama and all these cars hit the track

Link to comment
https://www.sau.com.au/forums/topic/255945-rota-p-45r-rims-awsome-gtr-gts-rim/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

no dramas they would look shit hot on a gunmetal or black gtr

Im hoping they look sexual on a silver 32 GTR as well, haha. I was hoping to grab the 9.5in wide 17's, but i am thinking that offset might be slightly too much for the 32. Looks like the 17x9's will have to be the ones i get.

they will fit, ive got 19x10 +15 n they fit fine.

Hmm, that does seem to be the general consesus going through the offset thread. I am trial fitting some drifteks on the weekend which are 17 x 9.5 +15 i believe, so it will be good to see.

Do your rims stick out at all SRB?? Have you had to roll your guards or do any modifications? Is it standard ride height or lowered? If you have any pics you could post or send me, that would be great!

Cheers

Edited by SLVR32GTR

hmm, should look great on a Silver 33 GT-R, i'll probably be in for some 18x9.5s but I'll send u a pm closer to march

cheers

hey these rims look animal :(

would these 17x9.0 +25 $339 rrp fatz price $306 fit and R32 GTST ???

i dont really know my offsets that well

cheers

sorry i cant help with offset i drive a r31

:D

they would fit perfect on a r31 with 5 stud is all i can say

as for weight they are lighter than drifteks... however i will not have a weight till they arrive

pete

Find that hard to believe as my 10' +18 were poking out of the guards.

i run 265/35/19s hankooks and they sit fine and the car is lowered all the way down to the tyre. rolled guards.

  • 2 weeks later...

so a few quick questions.

how much do they weigh?

when will these arrive? are they ready to be shipped out to my door asap or are they comming? i only ask because it reads like they will not be available untill late march.

thanks damo

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...