Jump to content
SAU Community

Recommended Posts

I've got a problem with my GT which ive had since i bought it, but it was never on the top of my list of things to do, but now it is lol.

under light throttle every now again I get what feels like a heavy missfire, not constantly, just a jolt every now and again sometimes it worse than others but its definantly always there, When i first got it i checked the ecu codes, it showed up 02 sensor code, so obviously i thought this was problem, i reset the codes, took it for a drive and then the 02 code came back, so i replaced the sensor, but i still have this problem, but the 02 sensor code hasnt come back, so it must have been completely unrelated althought i sometimes got the CEL coming on at the same time as the miss? Definantly didnt get any other codes besides 02 sensor (Double Confirmed with Consult) and im Definantly No Longer getting it.

Car Runs and idles fine, acceleration is fine and appears to rev to redline freely (maybe a bit slower than it should but thats coz its missing a turbo lol)

So throw some ideas at me? Doesnt seem like an afm problem does it? Maybe has the Dry Solder Joints problem? Or am i going to have to buy some coils? Its just when i changed my plugs the coils looked brand new, but i suppose not alot of dirt would get down there?

Edited by Silver_GT
I've got a problem with my GT which ive had since i bought it, but it was never on the top of my list of things to do, but now it is lol.

under light throttle every now again I get what feels like a heavy missfire, not constantly, just a jolt every now and again sometimes it worse than others but its definantly always there, When i first got it i checked the ecu codes, it showed up 02 sensor code, so obviously i thought this was problem, i reset the codes, took it for a drive and then the 02 code came back, so i replaced the sensor, but i still have this problem, but the 02 sensor code hasnt come back, so it must have been completely unrelated althought i sometimes got the CEL coming on at the same time as the miss? Definantly didnt get any other codes besides 02 sensor (Double Confirmed with Consult) and im Definantly No Longer getting it.

Car Runs and idles fine, acceleration is fine and appears to rev to redline freely (maybe a bit slower than it should but thats coz its missing a turbo lol)

So throw some ideas at me? Doesnt seem like an afm problem does it? Maybe has the Dry Solder Joints problem? Or am i going to have to buy some coils? Its just when i changed my plugs the coils looked brand new, but i suppose not alot of dirt would get down there?

________________________________________________________________________________

__________________________________________________

Unless you have Code 21 do not waste any time thinking about the coils - they must be OK - maybe you need to replace the fuel pump or fuel filter is clogged - look at the R34 Engine Service manual for clues to fix your specific symptoms - they are all listed there.

finally got off my ass and ran a few tests, first thing i check was the tps adjustment, it was out by 0.2 volts (was at 0.2, supposed to be at 0.4 with closed throttle) and its now PERFECT that i have adjusted it, it was something i originally thought "wouldnt have been touched so i wont bother checking" silly me! Throttle response is now completely smooth with no "jerkiness"

ok so after driving to and from work today, the problem is still there, but only very slightly and its nowhere near as violent, all signs point to me not adjusting the tps accurately enough, does anyone know if its supposed to be done with the engine cold (as heat generally creates more resistance, and the tps being a varistor, heat may alter its readings?)

That was my next port of call, was yours only giving you issues at very light throttle? My TPS is adjusted 100% to where it should be, and it still doing it, but only very very slightly, and i can more hear it than feel it.

http://www.skylinesaustralia.com/forums/Ca...tt-t256128.html

my car was missing on idle and light throttle when new sparkplugs gapped to 0.7mm were put in .. regapped to 1.0mm and problem was solved.

That was my next port of call, was yours only giving you issues at very light throttle? My TPS is adjusted 100% to where it should be, and it still doing it, but only very very slightly, and i can more hear it than feel it.

yep thats right...changing it fixed it...however it then sorta came back and i disconected my O2 sensor and now it runs a dream..just gota get a new O2 sensor now.

  • 1 month later...

Just to end this guys for somebodys future reference, it was the AFM (Will be confirmed monday when mine comes in the mail) But i disconnected it and started the car up, usually if i hold the revs at 1500 it would splutter every few seconds, with the afm disconnected it does not, seems to be it!

Just to end this guys for somebodys future reference, it was the AFM (Will be confirmed monday when mine comes in the mail) But i disconnected it and started the car up, usually if i hold the revs at 1500 it would splutter every few seconds, with the afm disconnected it does not, seems to be it!

Only problem with that is, the car will idle mint without an AFM, but as soon as you gve it any more revs it will cough and splutter even worse :P Not an ideal way to test it. lol.

You'd be better off borrowing someones AFM that you know works first. A friend of mine bought two second hand ones, and then a brand new one, a good $800 all up. Ended up being a faulty earth in the ECU :) Sucks to be him.

how the hell did he find out about the earth? Seriously sometimes the weirdness of skylines issues is a real worry and so depressing. How much does an OEM (don't have PFC so cant use z32) replacement AFM for an R34 GTT cost approx. ?

how the hell did he find out about the earth? Seriously sometimes the weirdness of skylines issues is a real worry and so depressing. How much does an OEM (don't have PFC so cant use z32) replacement AFM for an R34 GTT cost approx. ?

lol. I think it was around $600 NZD from RHD Japan. Expensive paper weight huh. Wont be able to recoop that cost easy.

In the end it was getting so frustrating he took it to an auto sparky who found the bad earth in an hour or so. He had just returned his car to stock from an HKS turbo kit/z32/pfc etc.

Im guessing it may have gotten damaged in storage. Bummer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
×
×
  • Create New...