Jump to content
SAU Community

Recommended Posts

Guys,

Cleaning out the garage, have to make room for my junk that I will prob not need but aquire anyway

Turbo exh manifold from 280zx, abit rusty but still good. $200

Stock dump and front from a hr30

Sump and some oil lines from HR30, i gotta see if these are still at my uncles

stock hr30 turbo blown seals

DR30 struts, missing one top spring perch, has stock springs and unknown shocks, disks rusty but will come off with some braking. caliper condish is unknown. These have 100mm caliper spacing tho.

Brought em from Ironmaskdr. went thru a huge ordeal in getting them from perth to melb via the datsun community haha

Will NOT post, $160

S12 Lca's with balljoints and steering arms, no idea if they are any use to you guys?

S12 adj castor rods $40

Located in west Melb, prices are marked next to item, if no price, make me a offer.

Please dont waste my time, I really cant be stuffed waiting for people that say they will show up, then dont.

Pics on request, anymore info on request

Cheerio

Dan :D

Link to comment
https://www.sau.com.au/forums/topic/256213-vic-r30-garage-cleanout/
Share on other sites

Hi Dan,

"Sump and some oil lines from HR30, i gotta see if these are still at my uncles"

I'll put my hand up for this, as I have just about everything else.

Can you put it in a box and post it to me please, or put it on Greyhound?

Cheers,

Dennis

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...