Jump to content
SAU Community

[20th Feb] Victorian Bushfire Fundraiser Cruise


Recommended Posts

  • Replies 141
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

the 32. :)

Deal! :(

Will probably be the last outing for the 32 for a couple of months so I'll take it out for a bit of fun before I start bolting the GT35R on :)

P.S. spose that means I should wash some of the dirt off lol

i was speaking to some ppl from another forum last night and "supposeably" today tonight is going to be there filming to show we r not all hoons that some ppl r just car lovers

Oh god.. i'm sure that's what they told the guy who notified today tonight... but in actuality they'll be looking for some hoon footage for more hoon bashing stories...

apparently they pay people to do burnouts for them to film.. :)

My guess is, they will rock up, Film some footage and be like "oh shit, no one is Hooning" then go Chop some footage of the same yellow 34 in there, and that is = 1x Hoon Report for them. :)

ahaha i might get there early and hold down the fort for us if any one else is keen in joining me?

im coming with white hr31 and benson in his white 33 and ricochet in his black 32 and a friends ve ss so keep an eye out for us we will be there bout 730 so try get some area for sauwa we will tell commodore to park away lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...