Jump to content
SAU Community

Recommended Posts

Hey All,

I have recently bought a 1995 R33 GTS4 and am currently driving it round on a rego permit, some of the things I need to get this car road worthy are as follows. If you don’t have any thing off my list if you can suggest where I can get these parts new or second hand in or around Melbourne it would me much appreciated.

Front and Rear Brake Pads

Rims (pref 18" black)

Headlights (pref 'smoked' ones)

Cigarette Lighter (not just the plug in bit but the stuff on the other side of the dash)

Front Grill (one that hasn’t got a place for a GTR badge)

Body Kit (full kit not sure what sort so PM me pics if you have one and ill see if I like it)

Adjustable Suspension (can they adjust the ride height? suggestions please)

Also can any one suggest any one to replace a front windscreen?

So if you have any items on the list or just hints or tips where to find them for a good price PM me or post here, I will be adding and removing stuff as I find stuff as I need it.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...