Jump to content
SAU Community

Recommended Posts

just got some rubber for my rims and wondered if they were a good price. fitted and balanced was a set of 4 275/30/19 nexen n3000. what have other people paid for this size. i was after a cheap set and these fit the bill.

BTW it was purchesed from newcastle/gateshead area

Link to comment
https://www.sau.com.au/forums/topic/256670-2753019-for-220-cheap/
Share on other sites

well being a DD i cant justify spending heaps on soft rubber that wear out in 15000 kms. ive been down that path already and having to shell out for nearly 2 sets of tyres a year starts to hurt. this time i wanted a harder compound tyre for the durability. thats why i also bought a second set of cheap std gtr rims, sticky tyres are much cheaper in 17" compared to 19".

well being a DD i cant justify spending heaps on soft rubber that wear out in 15000 kms. ive been down that path already and having to shell out for nearly 2 sets of tyres a year starts to hurt. this time i wanted a harder compound tyre for the durability. thats why i also bought a second set of cheap std gtr rims, sticky tyres are much cheaper in 17" compared to 19".

assuming these are for a R33 GTR (quick topic search), can i just ask u this, why would u buy a R33 GTR, a performance car, then stick boat anchors on it and only wrap it with cheap rubber. is it a status thing? most people who buy a GTR and use it properly for what the car is designed for would be lucky to only go through 2 sets of tyres a year, if u want something u can throw cheap ecconomy shit on buy a ecconomy box.

I cant understand why you people are having a go at this guy? :(

Not everyone knows what the best tyres are for every application.

A lot of the time when people visit a tyre shop the salesperson will tell them that the tyres that they are recommending are "good value" or "good performance".

For someone with little knowledge of tyres to hear a dealer say "these tyres are good" is usually very convincing.

The fact that he bought 19' rubber for the street doesnt really matter, as he said he plans on using lighter smaller 17' wheels and stickier tyres for the track (which is the best way to do it).

I personally think that 19's are a bit too big for Skylines but thats only my opinion... If he prefers to have 19's then thats his business, we are all individuals.

I cant understand why you people are having a go at this guy? :P

Not everyone knows what the best tyres are for every application.

A lot of the time when people visit a tyre shop the salesperson will tell them that the tyres that they are recommending are "good value" or "good performance".

For someone with little knowledge of tyres to hear a dealer say "these tyres are good" is usually very convincing.

The fact that he bought 19' rubber for the street doesnt really matter, as he said he plans on using lighter smaller 17' wheels and stickier tyres for the track (which is the best way to do it).

I personally think that 19's are a bit too big for Skylines but thats only my opinion... If he prefers to have 19's then thats his business, we are all individuals.

Visit the tyre thread, right here on this very site:

http://www.skylinesaustralia.com/forums/Ty...ate-t72923.html

It has loads of good info on tyres and probably will tell him to steer away from crap like the tyre's he has purchased. So your having a go at us for telling him that he has bought unsatisfactory tyres? Are you saying you don't need good tyres for the street? What if your involved in a situation where the car in front of you is braking hard and you need to brake hard and rely on your brakes AND TYRES to stop your ride from getting mashed. Would this constitute the need for good tyres?

Tyres aren't only useful on the track, they are also VERY important with every day driving. As others have said, i too don't see the point in buying a sports car and then skimping of the most important part on the car, the tyres. They are the ONLY part of the car that makes contact with the road and therefore would make sense to buy decent rubber. No offence but if you can't afford to buy a decent pair of tyres, then maybe owning a skyline isn't the best choice for you at the moment....

Visit the tyre thread, right here on this very site:

It has loads of good info on tyres and probably will tell him to steer away from crap like the tyre's he has purchased. So your having a go at us for telling him that he has bought unsatisfactory tyres? Are you saying you don't need good tyres for the street? What if your involved in a situation where the car in front of you is braking hard and you need to brake hard and rely on your brakes AND TYRES to stop your ride from getting mashed. Would this constitute the need for good tyres?

Tyres aren't only useful on the track, they are also VERY important with every day driving. As others have said, i too don't see the point in buying a sports car and then skimping of the most important part on the car, the tyres. They are the ONLY part of the car that makes contact with the road and therefore would make sense to buy decent rubber. No offence but if you can't afford to buy a decent pair of tyres, then maybe owning a skyline isn't the best choice for you at the moment....

Im not saying that you dont need good tyres for the street and I am not saying that the tyres he has bought are brilliant, I am saying that he has bought tyres that have a UTQG rating and DOT approval - meaning that regardless of how "crap" people say they are, they will stop the car and they will turn the car well enough for them to be considered road worthy... In my opinion this means that they are satisfactory.

Whether they perform better than more expensive or more well known brands is beside the point, the point is that he has bought tyres that suit the wheels that he chose for the car, he is obviously fairly happy with them so far and when he came here to ask whether he got them for the right price he was instantly put down for his choice.

Believe it or not but I do know a little bit about tyres and I know how important they are, I realise that there are much better tyres available but to be brutally honest he could have bought worse tyres.

Nexens are just bad tyres all around. Death traps in the dry, certain death in the wet.

But hey, if the guy wants craphouse rock tyres that will last a nuclear holocaust for daily driving leave him be. So in answer to your question yes they are cheap for that size.

Buy cheap get cheap.

judging by the response i probably should have spent a little more to get better tyres, anyways no big loss in a year i will just get another set thats a little better, (or buy a new car after i crash). though i dont think i will ever buy high end tyres again for road use. i bought 3 sets of dunlop sp9000 @ $2k a set and only lasted 15000 kms. its that i dont think i push the car hard enough on the road to justify the cost of these tyres. may be when i learn how to drive i might get some better rubber. anyways im happy atm with the rubber that i got.

not everyone has money to throw around everywhere.

I have the same tyre (nexen n3000 but 235/40/18) cost me $130 a corner or there abouts fitted and balanced.

seem to be coping fine with a 200rwkw GTST. I put them on to pass roadworthy after i had just bought the car

Didnt feel like spending $1000's on tyres after spending a butload of money buying a new car.

judging by the response i probably should have spent a little more to get better tyres, anyways no big loss in a year i will just get another set thats a little better, (or buy a new car after i crash). though i dont think i will ever buy high end tyres again for road use. i bought 3 sets of dunlop sp9000 @ $2k a set and only lasted 15000 kms. its that i dont think i push the car hard enough on the road to justify the cost of these tyres. may be when i learn how to drive i might get some better rubber. anyways im happy atm with the rubber that i got.

once again, it comes down to why would u buy a R33 GTR if u dont push the car, if ur not interested in performance then why buy a R33 GTR?

just got some rubber for my rims and wondered if they were a good price. fitted and balanced was a set of 4 275/30/19 nexen n3000. what have other people paid for this size. i was after a cheap set and these fit the bill.

BTW it was purchesed from newcastle/gateshead area

On my Volks at the moment are Federal 595SSs, 235/45/17 on the front and 255/40/17 on the rear. Not as good as the Bridgestone Potenzas that came with my car, but at nearly double the cost for Bridgestones for a tyre that wasn't twice as good didn't seem worth it at the time. These tyres have lasted 3 days at Wakefield, one at Eastern Creek and one at Oran Park North plus daily driving and STILL have plenty of meat left. While they aren't the best performing tyre on the market, it isn't the worst and the price is pretty good, especially if you are a SAU NSW member and get a discount :)

Now, about 3 weeks ago I bought some Stagea wheels with some 225/50/16 Nexen N3000s purely for drift rims and rubber. I have been driving on them for the past week and a half and I tell you I wouldn't buy these tyres for anything other than drifting, and that's assuming they can handle drifting for half a day without delaminating to death. Wheel spin in the wet going up a hill in 4th gear in a 145rwkW car to me is a pretty good indicator of this, considering I usually struggle to spin 3rd on my Federals in similar circumstances.

In my opinion, if you want a good compromise between price, tyre wear and performance, give Federals a go. As many have stated before, if you spend the money on a high performance car, insurance, rego, fuel, maintenance and (if you are that way inclined) modifications why skimp on tyres, it doesn't make sense.

On my Volks at the moment are Federal 595SSs, 235/45/17 on the front and 255/40/17 on the rear. Not as good as the Bridgestone Potenzas that came with my car, but at nearly double the cost for Bridgestones for a tyre that wasn't twice as good didn't seem worth it at the time. These tyres have lasted 3 days at Wakefield, one at Eastern Creek and one at Oran Park North plus daily driving and STILL have plenty of meat left. While they aren't the best performing tyre on the market, it isn't the worst and the price is pretty good, especially if you are a SAU NSW member and get a discount :)

lasting long doesnt make them a good tyre, in fact often it means the opposite, cheap hard compound which lasts for ever because it never creates much grip.

but i do get ur point, a lot of the cheaper tyres often last longer than more expensive tyres, especially with drift, something about the construction that holds up to delaminating better, tyres like the potenzas which are often great performing tyres are known for delamination with drift.

lasting long doesnt make them a good tyre, in fact often it means the opposite, cheap hard compound which lasts for ever because it never creates much grip.

but i do get ur point, a lot of the cheaper tyres often last longer than more expensive tyres, especially with drift, something about the construction that holds up to delaminating better, tyres like the potenzas which are often great performing tyres are known for delamination with drift.

I didn't mean to say that they where a good tyre because of how long they have lasted me alone. In my opinion they make a good compromise between grip and durability for the price I got them at, which was well under $200 a corner. I plan to pay more for my next set of tyres and lean more towards the grip side of things :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...