Jump to content
SAU Community

Tyre Choice For Mt Cotton Hillclimb

SLVR32GTR

By SLVR32GTR,
in Motorsport Discussion & Builds

 Share

Recommended Posts

SLVR32GTR Community Regular

SLVR32GTR

Posted
  • Author
Posted (edited)
Got a set of ku36 a few weeks ago from local tyrepower shop in Albury.

Prices were as follows

235/45 -$200

255/40 -$285

245/45 -$245 no stock at the time

Hey Luke,

Thanks for the info. Good prices there, but after factoring in freight and fitting costs, its probably no real saving to buying them locally unfortunately. How do you find the Kumho's? Im thinking about getting a set for the road now anyway.

Edited by SLVR32GTR
hrd-hr30 Grand Master

hrd-hr30

Posted
Posted (edited)

I have Kumho KU36 on my Supra because I track it fairly regularly and only have one set of rims. Good tyre for what they are, but they're not a semi slick. I use 245/40 and 275/35 * 18. I've done 2 Lakeside Sprints, 1 QR Sprint and probably 5000km of street driving since Sept last year.

On the road:

they're not loud, good in the wet, but tramline alot (I run a fairly agressive alignment too so its hard to say how much of that is caused by the tyre).

On the track:

- Only really good for about 3 laps before the rears go off. This is on my Supra remember, and my rears get a fair workout from my driving style... Might last a bit longer on an AWD car. I'm careful not to warm them up too much on the warm up lap as they work best just off cold. That's not to say they're better than a cold semi slick - they're not.

- They need alot of pressure like a street tyre. I run between 36 and 40psi cold. I found there was no point aiming for a target hot pressure because by the time they get hot, they're past their best. Better off aiming for a hot lap straight off the cuff with these tyres. Mine generaly come on the 1st or 2nd flying lap. byt he end of the 3rd lap you have to start being a bit more careful with the right foot.

I'm really happy with them on the Supra. If you only had one set of rims and wanted a jack-of-all-trades tyre,I'd recommend them. Or if you just want them as a really good street tyre and aren't really concerned about wear, then yeah go for it.

Edited by hrd-hr30
SLVR32GTR Community Regular

SLVR32GTR

Posted
  • Author
Posted

Thanks for the info Harry.

I just talked to Alan at Z Car Workshop here in Briz and i can get the following prices for Silverstone Tyres

FTZRR in 235/40 (largest in 17) for $375

s585 for slightly less than $375 (no exact price)

Am going to go and have a chat to him tomorrow hopefully and see what they are like, as i havent heard or read much about them.

Evocoop Collaborator

Evocoop

Posted
Posted

Try Track side tyres in melbourne. Craig is the man to deal with. 18 months ago we could get RE55's landed in townsville for 420 each for 255 17s. Very helpfull and if i was not getting toyo 888s cheap through my friends shop I'd use him agian for sure. Obviously with the exchange rate they won't be anywhere near that now but his service was outstanding.

code blue Enthusiast

code blue

Posted
Posted

I have only run them at a winton fun day so far, sprints start again in a few weeks.

Like Harry said tramlining can be a problem, but overall i'm really happy with them.

Harry how have you found the tyre wear so far?

Neil Grand Master

Neil

Posted
Posted

Tony,,,I really don't know much about which tyre you should use,,,but what I will tell you is very simple.

If you want to go fast at hillclimbing you have to use the softest tyre you can find. Grip on cold tyres is what it's all about.

It's no secret that all the libre/sports sedans run avon slicks,,,why,,,because there's no way you are going to get heat in the tyres,,,so the only other way to get grip is a softy.

If I was using a Skyline for cllimbing and had a spare set of wheels I would buy a durometer and start testing tyre hardness.

The only problem is they will end up being hillclimb tyres only.

Neil.

SLVR32GTR Community Regular

SLVR32GTR

Posted
  • Author
Posted

Thanks for the replies guys. Because i want to use the car for track days as well, im going to have to compromise and go a med-hard tyre im thinking. I will keep ringing around and getting prices and info and see how i go.

  • 1 year later...
anexiole Community Regular

anexiole

Posted
Posted

hi, there :happy:

1) what does tramline mean?

2) i have used Firenza Sumitomo before and they were fairly loud. How's road noise on the KU 36 compared to this?

3) does KU36 have some sort of "rim protection"?

thanks

On the road:

they're not loud, good in the wet, but tramline alot (I run a fairly agressive alignment too so its hard to say how much of that is caused by the tyre).

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted
hi, there :)

1) what does tramline mean?

2) i have used Firenza Sumitomo before and they were fairly loud. How's road noise on the KU 36 compared to this?

3) does KU36 have some sort of "rim protection"?

thanks

1) follows the contours in the road

2) never driven on the Sumitomos, so i can't say

3) yeah, pretty sure they did

  • 1 year later...
shifty_skyline Apprentice

shifty_skyline

Posted
Posted

hey guys,

i can get kumho ku36 or other semi slick tyres cheap as i work for a tyre company and get cost price for tyres if interested??

ku36 are a good semi slick tyre there much better on a awd car then a rear wheel drive.

thanx

R32 Stuart Community Regular

R32 Stuart

Posted
Posted

hey guys,

i can get kumho ku36 or other semi slick tyres cheap as i work for a tyre company and get cost price for tyres if interested??

ku36 are a good semi slick tyre there much better on a awd car then a rear wheel drive.

thanx

I'd recommend A050's - softs are ok for just hillclimbs on road going R32 - too soft for supersprints - we find mediums have done the job on both R32 & R33 at all NSW, Aussie and time attack events.

Tow out on the front, bitta tow in on the back around 28psi cold.

Enjoy

zebra Grand Master

zebra

Posted
Posted

hey guys,

i can get kumho ku36 or other semi slick tyres cheap as i work for a tyre company and get cost price for tyres if interested??

ku36 are a good semi slick tyre there much better on a awd car then a rear wheel drive.

thanx

id also recommened bridgestone re070 as a 22545r17 has a speed rating of w=270k which are a good tyre with the write alignment

They do not even compare to a proper semi like the AO50

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...