Jump to content
SAU Community

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

All PMS recieved and replyed to, im currently out of the country at the moment. my partner is getting the head fixed this week.

will post an update of the work and new sale price of the car.

Thanks.

  • 2 weeks later...
All PMS recieved and replyed to, im currently out of the country at the moment. my partner is getting the head fixed this week.

will post an update of the work and new sale price of the car once it has been completed.. dont know how long..

Thanks.

  • 4 weeks later...

UPDATE ON SALE

Have the car back on the road now after 3 months of pain,

The following was done to the head.

Removal of head, acid diped and cleaned up, fitment of tomie valve stem guides, hks springs, all new nissan exhaust and inlet vlaves, buckets and shims,

tomie metal head gaket, all other gaskets new, new bosh plugs, New gates timing belt idler kit etc, New cam oil seals, new head bolts.

Compression tested all cylinders came up good. Oil catch can installed. New oil and new oil filter, new coolant. Notice a Factory oil cooler in front of the raditor buyer can have this hooked up.

Car will require a complete dyno as the crank sensor was moved during the reinstaling and fittment on the Z32 airflow meters sard fuel pump etc.

Car is running smooth,lil rich, gates belt is abit noisy but starting to quiten up abit as it beds in. All bolts etc tensioned at correct torque setting.

Car was polished and driven home for garage.

New Front Springs will be installed this Friday at 8am as im not happy with the current front ride hight. And Koni adjustable shocks set.

Has Two new front tires.

I have a new cat convertor sitting in my shed which may be installed this weekend or so depending on shift work.

Ive also chucked subs and amps into it so the buyer can enjoy some doof doof.

two 10ich clairon subs with 1000wat PRECISION POWER PCX 5800 amp, head unit etc.

Current mods:

Engine:

Split fire coil packs

N1 turbos,

Braded speed flow water lines

Reco cyclinder head

Tomi valve guides

hks springs

nissasn exhaust and inlet valves

tomi metal head gasket

New head bolts

Gates timing belt

Oil catch can

INDUCTION:

KNN Pods

Bosh Z32 airflow meters with Tomi Plugs

HKS Super SQN BOV

FUEL SYSTEM:

SARD Intank replacement PUMP

Standard injectors with new seals

New ryco Fuel filter

SUSPENSION AND DRIVETRAIN

Exceedy Heavy Duty performace clutch

Machined flywheel

Nismo Diff with cooling fins

New Front left and right Drive shafts

New Koni shocks adjustable all round and new king springs

18X11 Rear 18x9.5 front WORK VS RIMS

Drilled Rear Brakes

MISC

Apex'i Power FC with hand controler (requires Tune)

Nismo 320 dash 98tho on the clock

nismo steering wheel

Full nismo body

3 inch exhaust

Interior in good condition aircon in good working condition

Paint in good condition

New front bar

Stainless intercooler pipes

Oil cooler ( Not hooked up)

No rear wiper

No ABS

Nismo build number 0231 1990 model

NEW PRICE NOT INCLUDING TRASNPORTATION

$ 17500

Contact details are via PM, Email or mobile located in Townsville (north Queensland)

Car will be sold without plates as there personalised

0431301801

[email protected]

Will upload pics soon

Thanks Guys.

:)

Edited by foney

Wondering, does anyone know what the cost would be on transport interstate to Perth? Just had my VZ SV6 written off by a transperth bus running a red light on thursday and looking for a new car...

i quoted a guy just under 1800 for the car transported to perth with the car not running. Now that it is i would assume that its cheaper.

I have to sell this car soon as im possibly moving overseas with a potential new job.

I will drop to 17000,

or drop the price more however remove parts. RIMS, Computer etc.

New springs were installed friday. Ride hight in the front is now lower.

Post pics soon.

Hi,

I am interested and financial cash buyer located in Perth.

Please email me some photos of car from both sides, front, rear, interior and engine bay please.

Also as far as I am aware, all Nismo edition 1990 GTRs were produced in Gunmetal Grey. Has this vehicle been resprayed blue?

Do you have any dyno graphs or power/torque figures for the motor?

My email address is [email protected]

Thanks,

Gan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...