Jump to content
SAU Community

Recommended Posts

hi all me again asking yet more questions :uh-huh:

in my everlasting triumph to convince my dad to buy a skyline over a new 2003 model crappy car i have come across an effective way to argue my case.

i can argue how RWD is sooo much better than FWD accept before i do that id actually need to know why. basically i know theres better control and traction but is this only at higher speeds? If you could please write basically the facts of the advantages of RWD over FWD id really appreciate that thanks

No flamers unless u have to :D all bumps welcome :bahaha:

Link to comment
https://www.sau.com.au/forums/topic/25752-fwd-vs-rwd/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Bambam's right, FWD is safer to control....in other words...it's harder to get it 'out of control'

definately less prone to spinning out in the wet.

advantages of RWD in the real world? Not much...

That's only if you wanna put your case forward that it corners and handles the way a car should on the race track.

Link to comment
https://www.sau.com.au/forums/topic/25752-fwd-vs-rwd/#findComment-546750
Share on other sites

i can argue how RWD is sooo much better than FWD accept before i do that id actually need to know why.

becoz it is a lot more fun

fun=danger

theres better control but not traction

unless u can use yr accleration to turn a corner, let yr tail go out a bit, but can u??

go for 2003 crappy car. u are just a kid, u should learn what a car has to do.:P

Link to comment
https://www.sau.com.au/forums/topic/25752-fwd-vs-rwd/#findComment-546760
Share on other sites

here's something to read about....not sure how relevent it is in your situation.

Article on FWD vs. RWD vs. AWD

--------------------------------------------------------------

http://www.toymods.org.au/fwd_rwd_awd.html

--------------------------------------------------------------

Link to comment
https://www.sau.com.au/forums/topic/25752-fwd-vs-rwd/#findComment-546780
Share on other sites

my first car was fwd, and guyz at work teased me cauz my engine faced the wrong way ! wen i got into my the skyline, its a different feeling altogether, missed the fwd in the beginning but after having a few exciting moments ;-) i wudnt go back. plus engine faces the right way now.

Link to comment
https://www.sau.com.au/forums/topic/25752-fwd-vs-rwd/#findComment-546848
Share on other sites

Things worth trying might be: (dunno how true these are, but if he dosn't know cars might be able to pull it off).

- The fact that there is a driveshaft running down the lenght of the car makes it the chassis stronger and more solid in the event of a crash.

- The only reason front wheel drive cars are made, is because their cheaper

- Skyline brakes are generally very strong (not related to drive but might help).

- If you know how to drive properly (which u obviosly do:)), RWD cars can be easier to controll, understeer badly in a corner in a fwd car, ur stuffed, oversteer can be controlled to an extent.

Link to comment
https://www.sau.com.au/forums/topic/25752-fwd-vs-rwd/#findComment-546868
Share on other sites

Drive any car stupidly and you can get into trouble. FWD is definitely a safer drivetrain. RWD is more fun, but basically I think you should follow everyone's advice, stop trying to bullshit your old man and buy a car you want with your own money.

If your old man wants a boring, reliable, economical, cheap to insure FWD car then try and bend him a bit but a skyline would be totally inappropriate for his needs.

Link to comment
https://www.sau.com.au/forums/topic/25752-fwd-vs-rwd/#findComment-546873
Share on other sites

RWD : Weight distribution is more balanced than FWD. Braking performance is enhanced. Your tires will wear more evenly.

Cornering is easyer and more responsive. Hard acceleration performance is better than a FWD.

Cornering is better due to power and steering is aplied through separate axles instead of the one. There is no torque steer.

FWD : traction is good during mild acceleration on wet/slippery surfaces. Lighter than a RWD. Better fuel economy. Most FWDs have a small engine. Interior room is enhanced because of no longitudinal driveshaft. Cheaper to afford

If your still after that r34 ive left a link in the other r34 post.

Hope i could help

Skyline boy

Link to comment
https://www.sau.com.au/forums/topic/25752-fwd-vs-rwd/#findComment-546883
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • R32 HICAS, so long as the CU is not itself faulty, is easy to keep working enough for the PS. Just unplug the smaller of the two loom plugs, on the CU, like I have already said about 4000 times on this forum. This works with all the stock hardware, or with a lock bar, or with a complete removal. I know, because I have done all of them. OK, actually, I never put a lock bar on because why would you put a lock bar on when you can get rid of the whole lot, including the stupid tie rod ends?
    • Join the NorCal facebook group btw, but if you can confirm it is HICAS I would install a lock bar and do the work to keep the HICAS control unit happy despite the hardware not functioning. The HICAS control unit is also responsible for speed sensitive power steering so if it's unhappy you'll get failsafe/heavy power steering. A standalone can control that power steering solenoid valve but sometimes it's just easier to stick with the factory setup. Tomei makes a little electronic module that you can install to fool the control unit. I would probably go through the effort to not use a scotch-lok and build a harness so I don't have to chop up the OEM harness. Where you could source those connectors and pins I wouldn't know at the moment though.
    • Oh, another question comes to mind though. What sort of shitty fuel are you feeding it. Mine, a turbo, has to be fed 98RON, so it doesn't ping itself to death. 98 in Oz is good, dense fuel with minimal oxygenated compounds. Meaning that the energy density is high, and if the O2 trim is working, you will get more MPG than with a lesser fuel. If you're using some sort of piss poor E10 blend with some other MBTE or other oxygenated additions, that could explain using more per mile.
    • I have no idea where the thump is coming from, it sounds like its from behind me but im not exactly sure. And it was the HICAS light that came on.   I think a complete delete is the route im going to go. Probably going to pick up the kit within the next month and get it installed. HICAS is just going to end up being a headache if I keep it.    Thanks you. 
    • Just putting this here for reference for other beginners. Similar to what I said above.  I learnt if you have a few dents that are fairly close to each other (within a couple of inches maybe 2-4 inches?) Use filler across them all and sand it all at once with the long block as opposed to fixing them seperately.  Will make life MUCH easier because you won't get stuck in the cycle that I did. I think doing it seperately there is some overlap (mean your whole repair zone might cover near the area of the other dent) and you start sanding near the other dent making a low spot.
×
×
  • Create New...