Jump to content
SAU Community

Recommended Posts

Hey fellow Skyline friends.

Was using my aircon the other night when it died.

got it checked out and found it was the compressor.

Does any1 have a compressor to suit an Rb25DET R33 skyline..

Need it pretty quick as its getting to over 40degrees here in rockhampton.

Cheers.

Michael

Link to comment
https://www.sau.com.au/forums/topic/257805-rb25det-aircon-compressor/
Share on other sites

My aircon shat itself about a year ago because i never used it, which causes the seals to dry out. Now it's summer i really want it going again, particularly since my car is black. An aircon place here in Cairns told me that sending mine off to be rebuilt (in Brisbane) and back on my car will take about a week and $1500. I asked if i should buy a 2nd hand one off ebay and hope it was in working order and he warned me that any aircon that has been off the car for a while (as unused) is likely to seize up anyway because of the seals, and will therefore require a rebuild in most cases anyway. As my car is simply my weekend warrior i have no problem losing it for as long as it takes but if you need your car day to day perhaps buy one and have it freshened up first, then book the car in to have the work done when convenient. I have watched compressors go off on ebay for $30.

oh rightio. I see...

I cannot get a compressor from anywhere here in rocky.

700 bucks fitted and all that jazz if i can find a compressor..

Is turbo model engine the same compressor as the RB25DE??

Because repco can get 1 of them but not for a turbo. Just curious.

The weather here in rocky is TOOO hot not to have the lovely skyline climate control.

Cheeeers, Michael

I dunno if they are interchangeable. Stick to what you have would be the safest bet. I have a series 1 and wanted to buy a series 2 compressor because it had much lower k's when removed from the car but the seller told me that the pipes were different sizes so i decided against it. you have an r33gtst s1 correct? next time i find a cheapie on ebay i'll post you a link. there are plenty of skyline wreckers in the brisbane area that would have a better idea than i do

I can confirm that S1 and S2 compressors are different sizes, i have a S1 but i managed to fit a S2 compressor on by using bigger O'rings..

i wouldnt advice this but i had no idea what series compressor i bought..

hope this helps. :P

I have a turbo R33 A/C compressor sitting here unsure if it is series one or two. I got it for free from a wrecker down here when chasing one for a R32 because he wasn't sure if it would work or not and just so you know the inlets on of the pipes is a think 1-2mm bigger on the R33 for then the R32. The biggest problem for a compressor would be postage as it is heavy as hell.

I know of Mark Gibbs Panel House which is just off Moss Street near me (Logan City). I can't remember how much it cost me to get my R32 compressor sent up from Nisswreck in melb as I had alot of trouble finding a working R32 one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...