Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

so what events are avaiable to compete in? I've only been to Easternats once and i know there's an 1/8mile drag and a lap cruise of sandown - what other events are there?

And what requirements do you need to be able to drive in those events?

thanks in advance

yea i be going to easternats doing the ride around the track do i have to fill out a form to go on the track or just the drag and burnout comps??? getting my car prep this week end for it new rear suspension going in next week and doing brakes and general service if i have enough cash maybe get a tune as well :D

You need to enter, tick the box's you want to compete in, even if your only doing the track cruise it will still cost you $200 to enter.

so what events are avaiable to compete in? I've only been to Easternats once and i know there's an 1/8mile drag and a lap cruise of sandown - what other events are there?

And what requirements do you need to be able to drive in those events?

thanks in advance

go to whoa, stampede, burnouts, drags and cruising, i think the drags are the only ones that require a helmet.

do they camp at the entrances and get ya on the way in and out? If thats the case then f*k that....i'm staying the hell away from there!!

I went a few years ago and they were watching people enter, leave and drive around the pits, when ever they saw one that was too loud they would write down the rego and you would get an epa notice in a week or two, best bet is to pull off your plates and rego label and trailer it or get there really early on friday and pull them off then leave it in the secure car park for the weekend.

Actually thinking about entering my whale...but if I do you blokes had better come up and say HI! or else....failing that plan ill def be trashed in the crowd somewhere on at least 1 of the days LOL...

if ur goin to enter, dowhat i did. trailer ur car there and back, take plates and rego sticker off b4 u leave home its the safest way. and do not do wat a few guys did last year and park the tow car and trailer out side and drive the car out of the paddock to the trailer... as u will get reemed!!!!! for all they guys that r entering hop u guys have fun and have better luck than i did last year cheers.

hmm so who's going but not entering in the events? u guys gonna convoy down?

I will be going for one day, not entering and not even taking my car there.

if ur goin to enter, dowhat i did. trailer ur car there and back, take plates and rego sticker off b4 u leave home its the safest way. and do not do wat a few guys did last year and park the tow car and trailer out side and drive the car out of the paddock to the trailer... as u will get reemed!!!!! for all they guys that r entering hop u guys have fun and have better luck than i did last year cheers.

I agree.

I had a look at the entry form and they require a photo of the car, the year i entered they didnt have that, had a lot of shitters there in primer and multi colored, bout time they tried to weed out the shitters and upped the quality of cars, after all i think they max out the entries every year dont they, the least they could do is send the shitters to the back of the queue and tell them to come back late on friday, if there is still spots they get in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...