Jump to content
SAU Community

Recommended Posts

I have finally found a cheaper dyno i want to buy.

Will read up to 360hp and around 400nm of torque. It is upgradeable past these limits and if all goes well i would do this upgrade.

Before I slap the money down just wanted to know how much interest the would be for very reasonable priced dyno access for diagnostics and tunning?

I will have the equipment for Nistune and shortly straight remaps.

Hire the dyno and do your own tuning or let my tuner do it.

We have a Motec Lambda meter and will be looking into a knock box aswell.

Will also then look into getting tuning equipment for PFCs and other ecu's.

Tell me your thoughts.

I think it would be a great service for the backyard DIYers

Link to comment
https://www.sau.com.au/forums/topic/258419-dyno-hire-how-much-interest/
Share on other sites

Its atleast 250kw+ so thats plenty for alot of people. I plan to upgrade the computer system asap so it will read alot higher. But also good for diagnostics not just power runs.

The actual physical hardware upgrade is only needed for hold higher loads and not straight power runs

Basically, 250rwkw is what most people are making (who don't still have stock turbos), my stag is making almost that and my 32 will be making a lot more than that soon. It's a great idea but you will need to look at getting the upgrades asap.. no point in offering people tuning facilities if they can't make full use of them :(

Is it a 4wd dyno? if not, that counts out anyone with 33/34gtrs and Stageas.

Who is "your" tuner? what does he have experience with? (engines and ecu's).

Its only 2wd. And yes will look at doing the computer upgrade as soon as i can.

My friend is the tuner. He has experience working with Nistune/remaps and also motec's(race/tarmac rally cars)

He does all the work on my cars apart from the tunning which i do but with his guidance.

I'm mainly aiming this for now at people on a budget but still want to do thing right.

Not just skylines. 180's, silvias. Also looking at remaps for fords/holdens as i've worked with them previously and the software wasn't too bad apart from the lack of real time tunning but that can be figured out with a moates emulator which i plan on getting.

After the upgrade would then like to get software for newer fords and holdens. But for now just want to start out slow and go with what i know.

As i said computer system will be upgraded asap i want handling for minimum 450rwkw.

Dyno will be located in Balga and probably looking around the $50 - $60 per hour range

I'm not after big earning just want my own dyno as i want to do all tuning on my cars my self and for friends.

If i make enough money to pay it off and upgrade then i will be happy as.

Also quite happy to let it be used for a dyno day and community type things for free(Beer would be nice :(

Tune up session before drift/drags that sort of thing.

Oh and really wanna get working my mine and my friends banshees on it. Jetting the cards is a complete bastard having to take it out and test after every change.

Would be handy for run ins aswell. I could rebuild 10 banshee engines in the time it takes to do the run in

Edited by Crans

hope you realise all the hassles you will have from your local council regarding noise etc

you will have to build a dyno specific room with sound proofing etc as it will be in a residential area

noise abatement laws are fun

In City Of Gosnells

only 1HOUR per day permitted of noise not considered as every day noise

Found all this stuff out because my neighbour is a drummer and no more than 1 hour per day between 9 a and 4 pm is permitted

NO abnormal noise l outside those hours is permitted

So I really think you will need to contact the City Of Stirling to find out what their noise policy is

hope you realise all the hassles you will have from your local council regarding noise etc

you will have to build a dyno specific room with sound proofing etc as it will be in a residential area

noise abatement laws are fun

In City Of Gosnells

only 1HOUR per day permitted of noise not considered as every day noise

Found all this stuff out because my neighbour is a drummer and no more than 1 hour per day between 9 a and 4 pm is permitted

NO abnormal noise l outside those hours is permitted

So I really think you will need to contact the City Of Stirling to find out what their noise policy is

Not to mention insurances.

Property and Personal.

big shed + perth heat + cheap install = sad sad dyno

the cost of the dyno is not the issue with running the dyno , a decent install if you want to be able to run your dyno frequently during the day will set you back 50k minumum for a decent cell setup with fans , extraction and sound proofing . on top of that commecial rents , insurance , public liability and indemnity etc etc etc . plus if its not a dyno dynamics no import guy cares anymore and no 4wd cuts out a lot of work also.

lol @ the people thinking it cant read your cars hp!!!!

i bet a good 9.9/10 of you would be lucky to get close to that max

sounds alright.. but all depends on value and what autoworx said **big shed + perth heat + cheap install = sad sad dyno**

lol @ the people thinking it cant read your cars hp!!!!

i bet a good 9.9/10 of you would be lucky to get close to that max

*

my stock unopened R32 GTR makes 342 @wheels and mine would be one of the stockest GTR's in Perth so i am sure 75% of the lines on here will make 350

here is a sample from MEMBERS area 6 out of the ten make 0ver 350

then all the non member cars you will find 350 hp @ wheels is considered very low these days

SAUWA Top 10

Outright Power

1: Gav - DynoDynamics - 93 R32 GTR (2.8L) - BP98 - 574rwhp

2: Mr Keets - DynoDynamics - 89 R32 GTR - BP98 - 430rwhp

3: Ossie21 - DynoDynamics - 95 R33 GTS-t - BP98 - 407rwhp

4: bnr#@ - DynoDynamics - 92 R32 GTR - BP98 - 381rwhp

5: R33GTRKid - DynoDynamics - 97 R33 GTR - BP98 - 380rwhp

6: Pattygtst - DynoDynamics - 96 R33 GTS-t - BP98 - 364rwhp

7: gazza750 - DynoDynamics - 93 R32 GTR - BP98 - 342rwhp

8: Topaz - DynoDynamics - 93 R32 GTR - BP98 - 331rwhp4

9: Pal - DynoDynamics - 94 R33 GTS-t - BP98 - 307rwhp

10: inthisglass - DynoDynamics - 96 R33 GTS-t - BP98 - 300rwhp

Edited by gazza750

I am only looking at running the dyno 1 day a week + weekends if needed so in no way a full time job. Its something i love and would like to help otheres out with

Who said anything about a cheap install??

It might be DIY but with a boilermaker in the family(brother) who was worked for years on commercial sheds + Old but still working commercial air con things would be quite comfy

Sounds proofing isnt a big deal neither are extractor fans.

There are plenty of people with lightly modified cars that are no where near 360hp. And im guessing alot of them have never had there cars tuned either but would like to.(Put off by hugh costs)

We are also planning a custom interceptor air fuel controller similar to the apexi safc but with full 3D mapping.

I am also working on an incar computer system purely for engine monitoring and datalogging with touch screen interface if needed. Currently in development in my 32 gtr.

Also in the first stages of planning is modifying the firmeware of the stock ecu's to bring in ignition cut and 0kph rev limiter(Launch control).

Sobasically these are all hobbies of mine that i want to share round and help people with.

If any one has a big shed with no near by houses i would gladly chuck the dyno in there :) if it made it easier

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...