Jump to content
SAU Community

Recommended Posts

  • Replies 285
  • Created
  • Last Reply

Top Posters In This Topic

having modified every car ive ever owned, even the shitters and dailys... ill always start with a stocker and build it into something thats just what i want.. it gives you something to do, something to look forward to and something to be proud of in the end. you get to take a standard car and make it better by fitting better components, adding adjustments, etc. without losing the spirit of the original car

buying someone elses car will never be like building your own, it will always be theirs... your just driving it now, unless youve had a hand in the build, you wont know what exactly has gone into such a car, and i dont mean component wise.

it also shows that you're not interested in the build, in the processes that a car goes through to get to a stage, in the highs and lows, the friendships, the emotions, the whole thing. you just want a fast car without putting in the hard yards.

wheres the respect and pride in that?

thats why people hate buying a modified car.

*thats not directed at you as a personal attack... just a conceived notion* :D

cheers

Linton

Edited by NZM.031
now all of you repeat after me:

The RB30E was also sold in the R31, not just the VL!

yes, this is my story moving forward if anyone asks about the rb30 :D

i had a vl turbo a few years back, stock with 15psi & i blew off a new m3 with sequential box (what a laugh that was)

in all seriousness though, the only decent thing about that vl was the engine & i'd tell me mates "this is a nissan engine"...the rest of the car was pffft!

yeah well im gonna build up a bottom end ive decided. why the hell not!! it will be a good comparison aswell.

rb26 with S372@2bar vs rb26/30 with S372@2 bar.. might evan throw it in annas car to see :P she loves "bedding in" my parts lol..

yeah well im gonna build up a bottom end ive decided. why the hell not!! it will be a good comparison aswell.

rb26 with S372@2bar vs rb26/30 with S372@2 bar.. might evan throw it in annas car to see ;) she loves "bedding in" my parts lol..

Hoooooray!

having modified every car ive ever owned, even the shitters and dailys... ill always start with a stocker and build it into something thats just what i want.. it gives you something to do, something to look forward to and something to be proud of in the end. you get to take a standard car and make it better by fitting better components, adding adjustments, etc. without losing the spirit of the original car

buying someone elses car will never be like building your own, it will always be theirs... your just driving it now, unless youve had a hand in the build, you wont know what exactly has gone into such a car, and i dont mean component wise.

it also shows that you're not interested in the build, in the processes that a car goes through to get to a stage, in the highs and lows, the friendships, the emotions, the whole thing. you just want a fast car without putting in the hard yards.

wheres the respect and pride in that?

thats why people hate buying a modified car.

*thats not directed at you as a personal attack... just a conceived notion* :)

cheers

Linton

IMO nothing to do with respect and pride.

I bought the r32 a little over 8 years ago with the goal for it to have a built rb20 that was quick, reliable and enjoyable.

I honestly thought and still think its a damn ugly car but what sold me was the drive; the chassis feedback, handling and at one with the car feel. Something the V8 Commodores can't get near.

I test drove a few R33's and didn't like the feel; felt too much like a Commodore for some reason. The R32 actually felt like a sports car.

When it comes to cars pride and joy really doesn't come in to it for me, I modify the car because I want it to be fast; it doesn't have bling, it doesn't have rice, big bodgy body kits or a silly sounding BOV. :P

When I first started out I bought a stocker because I didn't like the idea of a modified car already being 'thrashed'. Having a fair experience with v8 Commodores and VL's thrashed = no end of problems. The Skylines are tough cars that take a flogging so its not so much a worry.

My main niggle is spending $$ on silly little things like better diffs, ecu, injectors where as if its already done you don't have to spend as much and hear the missus complain why I have to spend 1.2k on a diff etc. :P

We all modify cars for different reasons. You modify for pride, respect I modify for the raw thrill and challenge of holding the car in a straight line.

I've been toying with the idea dropping in a VQ35 or VQ40 with a turbo or two. Even had thoughts of a little LS1 with a turbo strapped on but to be honest the LS1 is a little overkill. VQ35 or VQ40 with a turbo pushing 450-500rwkw will be more than enough and still have stellar response/spool.

Edited by TheRogue

I went a little O/T then but what I was getting at is people a modified car as possibly being thrashed and ready to fall apart when they purchase it.

IMO people tend to rather save a few thousand on the purchase price and go with the stocker rather than spend an extra few thousand and save 5-10k on parts.

If there was a GTR/GTST with a big single bolted on to forged bottom end.. I would highly consider its purchase if I were in the market.

Doesn't stop me throwing a forged RB30 bottom end at it for 6k and a larger turbo again.

Could possible save me spending $$ on ecu, afms (if applicable), possibly clutch, diff, suspension, fuel pump etc. :)

Really depends on the cars mods, age of mods etc if buying a modified car is worth it or not.

In saying that I wouldn't bother buying a setup like dirts UNLESS it was for dirt cheap. When people modify cars such as Dirts they tend to ask 10-15k over the normal purchase price of a stocker so IMO I'd rather do it myself for that cost.

Edited by TheRogue
In saying that I wouldn't bother buying a setup like dirts UNLESS it was for dirt cheap. When people modify cars such as Dirts they tend to ask 10-15k over the normal purchase price of a stocker so IMO I'd rather do it myself for that cost.

My car was only worth what someone was willing to pay for it. I offered my car at 1/2 of the build cost but due to the unpopularity of drag cars with the Skyline community it didn't sell. I knocked back a $45K offer for it due to it being worth more to me than that amount. I know of 2 modified R32 GTR's that in the last 2 years that have sold for around double that offer and id say the sellers still lost quite a bit of money that they had invested in them.

I bought our car bog stock as i have the resources to build it up to what i want it to be...that way no hidden surprises and with stock cars they are easier to compare against each other when looking to purchase. For some people its easier and less painful to buy one already done, and with the right car a bargain can be found. If i did buy a modified car it would be looked at for the sum of its parts and not the car itself. It would be ground up rebuilt anyway and any faults or improvements made as the build progressed. One of my close friends bought a modified GTR that had an engine failure the first time it saw the dyno, he paid a premium for it and now owes him over $70K. We could have built the same car a lot cheaper if he had brought a stocker (i dont charge him any labour to work on his car as he is a mate) as most of the good bits that he paid extra for were a throw-away when the engine expired. But not everyone is in the same position as we are to do our own work. Each car purchase comes with a different set of circumstances in regards to owner and intended use etc.

This is way off topic though...lets get back to the RB vs RB comparo

Edited by DiRTgarage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...