Jump to content
SAU Community

Recommended Posts

I have been asked if I would make some more Nismo style wing struts.

I would need at least six payed orders to make it viable to get some more laser cut, welded powder coated etc.

Delivery would be approx 2-3 weeks from the six orders being payed up.

Cost will be $320.00 per set mailed anywhere in Australia.

I have attached some pic's, let me no what you think.

post-2552-1235714983_thumb.jpg

post-2552-1235715099_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/258903-r34-nismo-style-wing-struts/
Share on other sites

I have been asked if I would make some more Nismo style wing struts.

...............................

I have attached some pic's, let me no what you think.

What do I think? As the owner of an R34 Coupe with the genuine adjustable rear spoiler (factory fitted from new together with several other Nismo options) - and with the car stickered very discreetly from the factory to identify Nismo options are fitted, I am very much amused by cars copiously covered with extravagantly huge -look at me - supermarket bought "Nismo" stickers, and especially so if they are running very poor imitation copies of Nismo product - lol.

Why don't you just call them "your style" wing struts?

lol

What do I think? As the owner of an R34 Coupe with the genuine adjustable rear spoiler (factory fitted from new together with several other Nismo options) - and with the car stickered very discreetly from the factory to identify Nismo options are fitted, I am very much amused by cars copiously covered with extravagantly huge -look at me - supermarket bought "Nismo" stickers, and especially so if they are running very poor imitation copies of Nismo product - lol.

Why don't you just call them "your style" wing struts?

lol

Well aren't you my shining knight!

I'm only trying to offer a service, if people take it up all well and good, if not no skin of my nose. I have seen alot of people chasing these me included. They are no longer available, and when they were they sold for $750 plus.

As for the Nismo decals, I also have several Nismo options and my cars apearance is totally my own choice what that has to do with this thread is totally beyond me!

If your interested in the group by, good. If not, go back out to the sand pit with the kiddies.

Edited by Wogboy
can you install the wing struts without the plastic covers?

any pics on how to install the wing struts ?

You can install them without the cover as the whole strut is powder coated black.

I do have some fitting instructions that I did a couple of years ago, it's a big file though. If you can PM me your e-mail and I will send them through.

Thanks.

What do I think? As the owner of an R34 Coupe with the genuine adjustable rear spoiler (factory fitted from new together with several other Nismo options) - and with the car stickered very discreetly from the factory to identify Nismo options are fitted, I am very much amused by cars copiously covered with extravagantly huge -look at me - supermarket bought "Nismo" stickers, and especially so if they are running very poor imitation copies of Nismo product - lol.

Why don't you just call them "your style" wing struts?

lol

Mate I can stomach spending over 1K per a rim for Nismo LMGT4's but did you ever stop to consider that people may not way to pay over $800 for a product that is clearly not worth that much and the fact that the product is no longer made? I would have snapped these up if I still had my R34. Maybe you should pop down to blockbuster and rent this...

l7207172581_8230.jpg

Mate I can stomach spending over 1K per a rim for Nismo LMGT4's but did you ever stop to consider that people may not way to pay over $800 for a product that is clearly not worth that much and the fact that the product is no longer made? I would have snapped these up if I still had my R34. Maybe you should pop down to blockbuster and rent this...

Isn't the idea of this thread, to see who is interested? Oh and by the way yes you are my HERO.

What do I think? As the owner of an R34 Coupe with the genuine adjustable rear spoiler (factory fitted from new together with several other Nismo options) - and with the car stickered very discreetly from the factory to identify Nismo options are fitted, I am very much amused by cars copiously covered with extravagantly huge -look at me - supermarket bought "Nismo" stickers, and especially so if they are running very poor imitation copies of Nismo product - lol.

Why don't you just call them "your style" wing struts?

lol

you sir are an absolute fool. The thread title reads... Nismo STYLE struts... because that's what they f*cking are retard! The guy has kindly offered to make some up for people who obviously like them a lot, and at least give people a chance of getting products similar to something that has been discontinued.

f*ck off out of this thread and take your ALTIA kitted 34 somewhere else, cos the kit you sport sure ain't Nismo

Mate I can stomach spending over 1K per a rim for Nismo LMGT4's but did you ever stop to consider that people may not way to pay over $800 for a product that is clearly not worth that much and the fact that the product is no longer made? I would have snapped these up if I still had my R34. Maybe you should pop down to blockbuster and rent this...

Isn't the idea of this thread, to see who is interested? Oh and by the way yes you are my HERO.

Sorry miss read, thought it was that other tool again :blink::P:( :(

Thanks for your support.

you sir are an absolute fool. The thread title reads... Nismo STYLE struts... because that's what they f*cking are retard! The guy has kindly offered to make some up for people who obviously like them a lot, and at least give people a chance of getting products similar to something that has been discontinued.

f*ck off out of this thread and take your ALTIA kitted 34 somewhere else, cos the kit you sport sure ain't Nismo

Thanks, that's what I thought to.

So do these just slot staright in to the factory wing and bolt onto the boot?

What material do you use for the uprights?

These bolt straight to the factory mounts, unbolt the old and bolt in the new.

They are cut from 5mm aluminium.

Thanks for your interest.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...