Jump to content
SAU Community

Recommended Posts

hey guy bought the 32 a few weeks back its a pretty stock 89 gts4 it had a cracked dump pipe which i had replaced but i still feel like there's no power ive read so many threads tryin to find advice more power said to put in a boost gauge before i dyno it to see if there's a leak ie intercooler piping im gonna clean my afm today and put on a new pod any other ideas to try and over come this it basically feels like it dosnt have much boost pressure it boosts and you can hear it but it dosnt pull im also gonna tape my coils for the time bein

cheers

Bill

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/
Share on other sites

how old is your pod? size?

when i bought a new one, i didnt realise the surface size was so important,

it literally suffocated the engine as the turbo spooled up.

i suggest buying another pod first, could be something as minor/stupid as that.

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/#findComment-4450735
Share on other sites

shut up damo :(

yeah, make sure you ckeck the bottom of the elbow pipes in particular, the tend to rub on the body of the car

and split over time, best way is to actually take them off and inspect. you may not see the split otherwise

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/#findComment-4450750
Share on other sites

shut up damo :(

yeah, make sure you ckeck the bottom of the elbow pipes in particular, the tend to rub on the body of the car

and split over time, best way is to actually take them off and inspect. you may not see the split otherwise

cheers guys ive got one of those hks dome pods it fair dirty gonna upgrade to K an N one any particular style model good??

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/#findComment-4450780
Share on other sites

I had a similar problem with my 33, turned out the computer got shorted and was running -40deg timing. Chuck a timing light on it. Also if you're not sure of their condition or type, change your plugs to Iridiums and gap them to 0.8mm

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/#findComment-4451427
Share on other sites

R32's when stock do feel fairly crap, mine used to feel like an N/A until I got some boost in to it.

They need exhaust and a little boost ~12psi then they start to come alive.

Taping coils won't do anything unless its popping/missing. If you must throw in a set of cheap copper BCPR6E plugs and gap them to 0.8mm. ~$24 for a set and they last a good 30,000km's on a near stocker with a little boost.

Lazy fuel pump can make a car feel really tired.

Best bet is to grab a base dyno run.

Throw it on the dyno at one of the up and coming dyno days. You'll soon know if something is off with it. :)

If you do the timing light check that will only be noticeable if you bring the car off idle. When on idle the car runs off its statically set timing via the CAS.

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/#findComment-4451907
Share on other sites

R32's when stock do feel fairly crap, mine used to feel like an N/A until I got some boost in to it.

They need exhaust and a little boost ~12psi then they start to come alive.

Taping coils won't do anything unless its popping/missing. If you must throw in a set of cheap copper BCPR6E plugs and gap them to 0.8mm. ~$24 for a set and they last a good 30,000km's on a near stocker with a little boost.

Lazy fuel pump can make a car feel really tired.

Best bet is to grab a base dyno run.

Throw it on the dyno at one of the up and coming dyno days. You'll soon know if something is off with it. :)

If you do the timing light check that will only be noticeable if you bring the car off idle. When on idle the car runs off its statically set timing via the CAS.

+1 for putting in at PGSA dyno day

Put it in the coming dyno day at Graham West Workshops

and ask Brett to give you advice on how the car is running etc

He will give you a lot of feedback and also will tell you what other simple things you can do to get the most out of your 32 mate

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/#findComment-4453153
Share on other sites

-1 for putting it on at PGASA, the last thing they wanna do down there is diagnose your problem when they are whipping through 50 cars on the day..

Take it down to Aussie Dyno on corner of port rd and south rd, or boostworx (youll have to book in) boothby st panorama.

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/#findComment-4453275
Share on other sites

-1 for putting it on at PGASA, the last thing they wanna do down there is diagnose your problem when they are whipping through 50 cars on the day..

Take it down to Aussie Dyno on corner of port rd and south rd, or boostworx (youll have to book in) boothby st panorama.

Damo if you look at the entry form

they have the option of either entering in as competing

or entering in to get tuning details

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/#findComment-4453284
Share on other sites

i ticked the tuning box. good opportunity to get the word on my car from people in the know.

Yep i circled both on that one

To enter and see what i can beat and also to get some good feedback on how the 33 is going etc etc

Link to comment
https://www.sau.com.au/forums/topic/258985-no-power/#findComment-4453325
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...