Jump to content
SAU Community

Recommended Posts

hey i know there are topics like this already but i just want to know whats the best wheels for drifting (r33 gtst).

ie. 17" by 9.5" off set??? tire size/brands front and rear sizes. dont care if i have to roll guards and shit like that. only want opinions from people that drift and know a thing or 2 about it. thanx guys

Link to comment
https://www.sau.com.au/forums/topic/259287-best-wheel-combo/
Share on other sites

17 X 8.5 and 17X9 or 9.5 would be a good set up, I ran that size and I found that the best tyres where BRIGESTONE RE55 semi slicks up front and what ever your budjet alows on the rear ( obviously dont put semi's on the rear ) alott has to do with what sort of power your car has because you dont realy want to hit the track with 10" wide rears and not enough power to get them spinning, DRIFTTEKS are good but you could hunt around for something like a forged SSR, WORK, VOLK/RAYS, BUDDY CLUB, or some thimg like that, as you will find a fully forged wheel heaps better for drift due to how much lighter they are. I can stress enough how important the semi slicks are in the equasion though they make a bloody huge difference and you will achive mad high speed entries with F all under steer if any.

thats my 2cents anyway.

off sets and spacers varrie heaps, from memorie I ran a conservitive +32 off set which isnt the toughest looking but I had bolt on spacers and I was on a budget at the time and got my ssr's cheap of a mate.

u have to understand that question is basically the same as asking "what turbo should i run"

without added details theres really no way we can answer it.

what tyres do u want to run, whats ur budget, do u want to stretch, do u want lightweight, are u willing to roll ur guards, do u want tough fitment etc etc

ok mate..

tyres- what do people recommend?

budget- im not gonna spend 3k on drift wheels but maybe half that or 2k max (not including tyres)

stretch- if thats whats best for drift and how much should you stretch em???

light weight- if it suits my budget

roll guards- already said i would in my first post!

tough fitment- again if it suits my budget

i'll throw one in you forgot to mention nisskid

power- 240rwks

yeh i would only need to know power if i was reccomending a tyre, not wheel. as far u wanting a reccomendation on tyre, thats a whole different ball game, once again depends on ur budget. in 17" u have a few common sizes, 235/45 probably being the most common around that size, 255/45 being the next more commonish size, not a lot bigger than that around in 17's. this is important for drift as ull be going through them pretty quickly.

if u went the 235's, id be going a 9.5", bit of stretch to keep the cheaper tyres sidewalls firm, but also lets u go up to a 255 comfortably if u choose to. offset of around +35 will make them sit comfortable, obviously the lower u go the tougher it will look, but the harder it will be to fit the tyres comfortably.

i run 5zigen 17 x 9.5 +22 all round. on the front i run brigestone potenza re55 semi slicks as well and swear by them. on the back i run 235/45/17 federal 595S but they are getting quite exxy in the cost, i found after trying out so many that these tyres suit me best. its sort of trial and error as to which tyre will best suit the way you like the car to feel.

alot of the cheap tyres delam quickly and feel like you are skating when doing fast transitions

also the federals are great in the wet awesome water dispersion.

yeah 33 gtr's are a fantastic wheel, there one of the lightest rims getting around especially in the price range, like i said and the other guys GO THE RE55's on the front they are one mean semi slick!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Edited by WHITE R33
not really.

you left off where I clearly stated "in that sort of price range" they weighed and trialed heaps of wheels on the new zealand gtr drag car owned by rece mcgreggor and he found them an extremely eficiant wheel, From memorie him gtr with the hydraulic lock set up in it went low 9s and I think high 8s in the end.

you left off where I clearly stated "in that sort of price range" they weighed and trialed heaps of wheels on the new zealand gtr drag car owned by rece mcgreggor and he found them an extremely eficiant wheel, From memorie him gtr with the hydraulic lock set up in it went low 9s and I think high 8s in the end.

yes and no, u said "especially", which meant including regardless of the price range. they are light, but not crazy light. my modenas weighed less in a 17x9.5, and my 17x9 works weighed less as well, both bought for between 1/5 and 1/3 of the price of GTR wheels.

they are a good wheel tho, def reccomend them.

yes and no, u said "especially", which meant including regardless of the price range. they are light, but not crazy light. my modenas weighed less in a 17x9.5, and my 17x9 works weighed less as well, both bought for between 1/5 and 1/3 of the price of GTR wheels.

they are a good wheel tho, def reccomend them.

verry true, agree with nisskid on that if you could dig up a cheap set of jap forged heels then do that for sure, but yeah i just meant the 33 gtr's are good on a budget.

good luck mate, get some pics up when u decide what your going with I ove 33 drift cops

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around with a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
    • Yep, this bit another local owner. I caught it before putting the transmission back into the car, what I noticed was the pressure plate fingers weren't flat and even. It's more obvious with the pull style clutch because the throwout bearing ring was visibly not flat once everything is put together. Nismo should really update their instructions to call out this specific detail. I'm not even sure the clutch as-shipped orients everything properly.
×
×
  • Create New...