Jump to content
SAU Community

Recommended Posts

my mate has smashed his 32 GTR tonight, passenger side banana'd

front guards $600

bonnet (available in 2 weeks) $600

front lights $300

front grille $200

front brakes $300

rear cut incl window, rear cradle, diff $2000

seats front / rear $700

RB26DETT with fresh recod head ($2500), just last week!! withn1 oil pump, loom and ecu $5000

gearbox and clutch $700

bootlid and wing $400

bare front cut with windscreen $1000

all interior parts are for sale, pm with what u want or need ill see how i go. car has started to be stripped, so please be patient and ill do my best to attend to everyones enquiries.

thanks

Link to comment
https://www.sau.com.au/forums/topic/259343-wrecking-r32-gtr-1994-black/
Share on other sites

my mate has smashed his 32 GTR tonight, passenger side banana'd

front guards $600

bonnet (available in 2 weeks) $600

front lights $300

front grille $200

front brakes $300

rear cut incl window, rear cradle, diff $2000

seats front / rear $700

RB26DETT with fresh recod head ($2500), just last week!! withn1 oil pump, loom and ecu $5000

gearbox and clutch $700

bootlid and wing $400

bare front cut with windscreen $1000

all interior parts are for sale, pm with what u want or need ill see how i go. car has started to be stripped, so please be patient and ill do my best to attend to everyones enquiries.

thanks

im after the console surround that goes from around the gearstick to up around the centre gauges.

I'll take the front & rear seats if they're in good nick, no tears/rips/stains etc.

I also will need some interior trim pieces. PM me your details and I'll give you a buzz.

ill take the whole boot parts, interior plastics in the boot.

ill take the two front kick panels, and the ash tray.

also the two side plastic skyline panels that run on the sills.

ill also take the original airbox if you have it

and the original exauhst if you have it.

please pm me

im after the console surround that goes from around the gearstick to up around the centre gauges.

ok, as soon as we get it off and its all good ill pm u and get ur details

so, this part sold to u pending.

Ill take the full front end bonet,lights,grill,front bar,and both gaurds

pm me your number

pm sent

I'll take the front & rear seats if they're in good nick, no tears/rips/stains etc.

I also will need some interior trim pieces. PM me your details and I'll give you a buzz.

hey, theyll need a clean but no rips etc in them

pm sent

ill take the whole boot parts, interior plastics in the boot.

ill take the two front kick panels, and the ash tray.

also the two side plastic skyline panels that run on the sills.

ill also take the original airbox if you have it

and the original exauhst if you have it.

please pm me

whole boot parts arent there.

u can have the kick panels, ashtray and sill panels. and ill double check on airbox and exhaust, pm me

Ill take dash cluster/o2 sensors from exhaust/Clutch (depending on what it is).

PM me prices,

Thanks

will check 4 u n get back to u

Hi, is the lip that sits under the front bumper available?

Cheers :P

sorry not available seperate. front bar and lip will be available in a week or so

keen on the front bar and set of seats if their in good cond?

pm me

sorry, so far both r accounted for

GUYS, THE CAR IS BEING STRIPPED ATM SHOULD TAKE A FEW DAYS, ONCE ITS ALL DONE, I WILL START TO PM U ALL AND START SENDING THEM OUT!

  • 2 weeks later...

hey a quick update, most of the interior has now been stripped, seats need a good clean, will start updating with pics tomoro but heres the list of things available now

front guards $600/pair

bonnet $600

front lights $300

front grille $200

front bar no lip $300 (lip available 2 weeks) $300

front brakes (incl. DBA slotted rotors)/rear brakes incl all 4 hubs $800

rear cut with quarter panels $1000

seats front / rear $700

drivers door $250

centre console $50

stereo/shiter surround $75

door trims $100

rear upper trims $75

rear lower trims $75

carpet $50

cluster surround with switches $100

RB26DETT with fresh recod head ($2500), just last week!! withn1 oil pump, loom and ecu $4500

gearbox and clutch $500

bootlid and wing $300

bare front cut with windscreen $1000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...