Jump to content
SAU Community

Recommended Posts

GROUP BUY ENDS 31 MARCH 2009

UAS brake booster stoppers reduces firewall flex when braking for more responsive braking.

The pedal has a more positive feel (a less spongy feeling).

A must for track days and worth considering for enthusiastic streeters.

DIY installation.

What you get:

5mm laser cut alloy

TIG welded

Anodised black

Stainless allen key adjusting bolt

Stainless mounting bolts to secure direct to recessed nuts on inside of strut tower.

Full kit much is lighter than Cusco and as strong, looks better and won’t rust.

Price: $70 each plus delivery.

Delivery: $12.50 freight and handling.

The RRP from UAS is $95

(This price compares very favourably to the Cusco brake cylinder stopper $175 delivered Nengun).

Installation takes about 10minutes tooles required:

10mm spanner or socket + 5.5mm hex key (or strong fingers and pliers)

Step 1. Remove the plastic covers on the drivers side to reveal the recessed nuts in inner skirt.

Step 2. Align alloy brake stopper and install mounting bolts.

step 3. Tighten allen key adjusting bolt against the brake cylinder.

Step 4. Check and re-tighten bolts after 1-2 weeks.

post-5777-1236053248_thumb.jpgpost-5777-1236053260_thumb.jpg

IF YOU WOULD LIKE TO GO AHEAD PLEASE PM ME FOR PAYMENT DETAILS.

PICK UP AVAILABLE IN SYDNEY.

Group buy 5 or more.

1. Wolverine

2.

3.

4.

5.

Edited by wolverine
  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I have wanted one of these for a long time for my GTR. If John has finally got some more made then you had better put me down for one.

what are the chances there is damage to the cylinder wall if you stomp your brakes real hard and the cylinder instead of flexing pushes against the stopper??? Wouldn't it be a good idea to have some sort of thick rubber cap there instead of metal-on-metal ??

what are the chances there is damage to the cylinder wall if you stomp your brakes real hard and the cylinder instead of flexing pushes against the stopper??? Wouldn't it be a good idea to have some sort of thick rubber cap there instead of metal-on-metal ??

i have never heard of damage due to this issue.

the reason for using a metal brace is to reduce the effect of firewall flex so the brakes function as intended.

do you want me to add you to the GB list?

I understand the purpose of it and I'm "probably" in for the next GB due to finances right now .. but I'm pretty sure I read somewhere that the Cusco one has a rubber cap so that the brake cylinder isn't hitting metal on metal as that can damage the cylinder and that all these other copies are just completely made out of metal.

edit: I suppose it would be rather ease to just glue on a piece of rubber on the part that touches the brake cylinder so I guess it's a non-issue. Will you run this GB again later this month? Cheers

Edited by Delta Force

yeah i'm sure this GB can go again if there is interest (and UAS are keen to let me do it again).

i intend on fulfilling the first 5 orders asap. so hopefully pick-ups as soon as tomorrow and delivery once the money has cleared.

regardless, the GB will still be open for the whole month and i will organise the delivery/pickup for anyone else until 31 march 2009 (or UAS run out, whatever comes first. i am assured there are plenty in stock).

Pick up should be available from this afternoon delivery for the others when the money clears.

1. Wolverine

2. Sheng

3. Victory

4. Wisey18

5. Raps86

6. R34GTFOUR

7.

8.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...