Jump to content
SAU Community

Recommended Posts

Hi all, the title says it all. I have begun organizing a cruise for the entire state. The plan so far is to leave from Burnie and travel to Launceston pick up more people there, travel to st Helens then down the east coast to Hobart, stay the night in Hobart and travel back the next day. I am thinking of running the cruise on the 11 and 12 of next month. I have an idea in mind to have a gold coin donation for attending the cruise, as well as a raffle. This cruise is intended for anyone with any type of car to come along. I have already spoken to a member from velocity and he is going to talk to their members to get them involved. I am also going to get in touch with Tas Commodores to see if they are interested.

If anyone has any ideas or can help organize or can get hold of donations for a raffle it would be greatly appreciated. All proceeds from this cruise are planned to go to the Red Cross Victorian bushfire appeal. However to run the fundraiser I'll need a club to run the cruise. So can anyone interested give me a pm or reply to this post. I'll handle the bookings required to run this cruise but I'll need numbers quickly, so all that will be required on the day is your car and money for your accommodation if you decide to stay

Link to comment
https://www.sau.com.au/forums/topic/259419-statewide-cruise/
Share on other sites

us southerners had a charity cruise the other week down to port arthur, and i think the drift guys have a fund raising thing at basky this weekend.

ok, this cruise is intended for more than just the SAU guys, but we haven't had anything for the northern guys for a little while

Hi all, this has only just come to my attention that the 11th and 12th are in fact Easter weekend. So to make things easier on a lot of people i am going to move the cruise a week to the 18th and 19th. Sorry for the inconvenience

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...