Jump to content
SAU Community

Recommended Posts

Hey just a question on Turbo Diesel motors in particular the 4.2L's in Nissan Patrols. I often see offroad modified examples and when they change gear this is sort of a loud blow back noise. Kind of like an loud rush of air. It doesnt sound like a BoV or Compressor Surge and being a diesel it cant do it anyway so what is this noise???

Link to comment
https://www.sau.com.au/forums/topic/259469-turbo-diesel-question/
Share on other sites

Hey just a question on Turbo Diesel motors in particular the 4.2L's in Nissan Patrols. I often see offroad modified examples and when they change gear this is sort of a loud blow back noise. Kind of like an loud rush of air. It doesnt sound like a BoV or Compressor Surge and being a diesel it cant do it anyway so what is this noise???

do you have a clip of this or anything you can show?

as it is possible to get compressor surge, as with the vw diesels you can manege to get it to have a 'dose' or flutter affect.

diesel engines have turbos just like petrol ones, dont see why it wouldnt flutter or have a bov.

modified examples are comming up now as diesel engine blocks run high compression and are cast iron + i read somewhere that diesel has a high tolerance to detonation so you can run high boost levels e.g. f250 trucks in the U.S. running great quarter mile numbers.

drive next to a truck, you can hear plenty of induction noise/rushes of air off-throttle

diesel engines have turbos just like petrol ones, dont see why it wouldnt flutter or have a bov.

Most diesel engines do not have a throttle body and there will always be a valve open some where for the air to go so back pressure will not build up like a petrol engine. Saying that i have a 3ltr turbo diesel rodeo and it has a throttle body and did sometimes make a tiny little noise when it was new.

Yeh I know diesels have same turbos but I was under the impression that due to having no throttle plate there could be no compressor surge. I dont have a sound clip but If u watch some 4.2L patrol videos on youtube some of them make the noise when they change gear. Im sure youve all heard those patrols / landcruisers with the big mud tyres and exhaust before they all make the same noise when they change gear. If any of u know that whistle for a hot chick (cant remember what its called) bird call or sumthin it sounds exactly like that except not 2 stages of whistle just 1... sorry for retarded examples.

you will only get a dose or flutter from a diesel if it has a throtlbody on it the motor you are taking about dose not have one

4.2 TD GQ running 18PSI

that is my old HJ60 with a throtlbody running 10PSI

sorry guys i sux at spelling

Edited by mr-r33

NISMO...Give roadworia a PM. He should be able to find out the answer to your question as he works on them at nissan.

I know you can get vl style flutter off diesel peugeots when you stall them up lol.

Edited by nIsMo86

well. as diesels dont have a throttle, they use fuel injection as the throttle. more fuel more revs, they still have the same varieng loads and air consumsion diferances as petrol engines,

so when they get of the throttle the fuel usage drops and so does the amount of air reqired. so surge is not uncommon.

ps.. the im pretty sure direct injection petrol engines dont have a throttle iether..

if im heaps wrong and someone knows please corect me.

Hey dave you are not wrong mate most don't, But some newer DI models mainly the euro and California spec ones do have a throttle body but it is not used as the throttle as you above mentioned. It is only there to control black smoke and emissions etc.

Our large diesel engines don't even run wastegates, They only boost up to how much fuel you give it and how much load is on the engine.

As said in earlier posts the only diesels that will give a flutter/dose/compressor surge are the ones that have a throttle butterfly. they work in the same principle as a petrol engine, butterfly position determines the amount of diesel that will be injected and how often etc and as you all kno the pressure has no where to go but out of the air filter..

Most of the new aged japanese diesels run on a common rail system, engine runs a normal engine driven fuel pump which feeds up to the "common rail" it then goes from there to each cylinder through an EUP (electronic unit injectors) which inject the right amount of diesel determined by throttle position via a sensor on the accelerator pedal/rpm/load/speed etc!

The older diesel engines just run the conventional style diesel injection pump, which has a rack inside it, inturn it sends the diesel up the pipes to the injectors detirmined by engine position (its run via the timing gears) so it doesnt need a butterfly

All a bit confusing i kno but it sort of makes sense when u work on them everyday, might not have everything 100% right but it gives you guys a bit of an idea how they work. some of the euro diesels combine all of them together to really stuff us up lol, we have a Merc vito van as a breakdown vehicle and it flutters like mad!!

As stated above ^^ most of the diesels that have butterflys are there for emissions purposes. but i have seen a few engines that actually use themas a throttle body

Edited by WARDY32
well. as diesels dont have a throttle, they use fuel injection as the throttle. more fuel more revs, they still have the same varieng loads and air consumsion diferances as petrol engines,

so when they get of the throttle the fuel usage drops and so does the amount of air reqired. so surge is not uncommon.

ps.. the im pretty sure direct injection petrol engines dont have a throttle iether..

if im heaps wrong and someone knows please corect me.

Whaaat - you guys are on drugs. There is no factory realeased DI gasoline engine that doesn't have a throttle plate!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...