Jump to content
SAU Community

Recommended Posts

Hi guys,

Was wondering if anyone knows what is wrong with the SLIP light on my dashboard, it blinks on high speed and i also lose power everytime it does this.

The car is a r34 gt-t and the SLIP indicator is related to the TCS (traction control system?). This happens only on straight road and high speeds ( 3th n 4th gear mostly).

Took to the mechanic and he reckons its some g sensor on the car. Does the r34 gt-t have a G sensor?

Any help will be much appreciated. THanks!

Link to comment
https://www.sau.com.au/forums/topic/259504-slip-light-blinks-on-high-speed/
Share on other sites

uber wheel spinning at high speeds :D ... i have no idea sorry sounds very strange, not sure if the tcs runs with wheel speed sensors check each hub ( if they have them ) maybe could be a issue but i just stabing in dark =]

I have the same problem. Same tyre sizing, same power and I have noticed that it happens more with more weight (people, cargo) in the car. I'm worried that the plates in the tranny are slipping. I'll admit though, it's more prone at higher speeds than you stated and when revs are between say 4000rpm to 5500rpm.

  • 4 years later...

I have the same issue on my 34 GTT (running on 34R wheels). I have this issue at high speed and I drop down a gear to overtake or sprint off.

My solution is turn off the TCS. Its now a normal start up procedure for me. Haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...